Soundtube ROCQUETTE-S, Rockustics 6.5" 2-way Outdoor Rock Speaker in Sandstone
Vendor: SoundTube
Available
Soundtube ROCQUETTE-S, Rockustics 6.5" 2-way Outdoor Rock Speaker in Sandstone
The color sandstone Soundtube ROCQUETTE-S has a unique weathered/layered shale appearance. The Soundtube ROCQUETTE-S also has a low vetical profile enabling its use underneath shrubs or among low plants. Also, the Soundtube ROCQUETTE-S has a two way design that incorporates a 6.5" woofer and 3/4" tweeter. Also, Soundtube ROCQUETTE-S has an optional 64W transformer which is available for using the Rocquette in 70V systems. The Soundtube ROCQUETTE-S is only available in limited quantity so what are you wating for? Order now!
Optimizing Speaker Placement for Best Sound
All Rockustics speakers can generate a high SPL (sound pressure level). Be ready to rock, but be considerate of your neighbors! Maximum acoustic performance should be an important factor in determining speaker placement. Here is how to achieve it:
- Establish where the most likely or average listening position will be.
- The speakers should be placed at or close to the same distance from that point.
- The actual distance between the listening position and the location of the speakers is not critical. However, keep in mind that as the distance between listening area and speaker is increased, there will be a noticeable decrease in perceived volume.
- Be sure to confirm amp power matches the power rating on the speaker. Over-driving the speaker can lead to permanent damage that is not covered under warranty.
Optimizing Aesthetics with Speaker Placement
All Rockustics products are designed with a boost in high frequency response to accommodate for placement near plants and other landscaping features. Feel free to position the product within your landscaping, camouflaged near bushes or shrubs. Rockustics products strive to blend into the natural aesthetic of their surroundings. Be sure to account for the wires which will run from the rock to your stereo or audio source. Camouflage wires by running them an inch below ground level when possible.