Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)

Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)

Name: Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)
Brand: Symetrix
SKU: AEC Module, AEC-2
Price: 1061.00 USD
Availability: InStock

Vendor: Symetrix

Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references) Two models. The Radius NX 4×4 (with 4 analog inputs and 4 analog outputs) and the Radius NX 12×8 (with 12...

$1,061.00

Default Title

Subtotal:

Quantity

Description

Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)

Two models. The Radius NX 4×4 (with 4 analog inputs and 4 analog outputs) and the Radius NX 12×8 (with 12 analog inputs and 8 analog outputs) both feature 64×64 redundant Dante networking and share identical DSP resources. Their primary differences lie in analog I/O, logic outputs, and external control input capacity. The more affordable 4×4 model offers a cost-effective solution for systems relying heavily on Dante endpoints and requiring fewer analog connections.

Optional virtualized and scalable AEC coprocessor module. For conferencing applications the dual-core coprocessor provides up to 16 channels of full bandwidth AEC with unparalleled clarity and intelligibility.

USB audio port. Enables soft-codec conferencing and computer-based multitrack recording or playback.

USB host port. Supports upcoming recording and archiving, audio media playback, digital messaging, and automatic unit backup for rapid field swaps.

128×128 Super Matrix. A Next-generation SHARC Dual-core Processor enables a Composer Super Matrix – placing the burden of large matrices in one core while freeing the second core for general purpose signal processing – making it possible to design very large and complex systems around a single Radius NX. View modes make navigating through large matrices a breeze.

Configurable 4-port gigabit switch. Services both Dante and control networks, eliminating or reducing the need for external switches while avoiding 100 Mbit bottlenecks.

Ultra-low noise preamps. Digitally controlled 3 dB steps facilitate precise gain setting resulting in unmatched sound quality.

Option card slot. Accepts all Radius and Edge Expansion Cards, maximizing Radius NX input/output counts or adding special purpose functionality to reduce total system cost.

Features

Optional AEC coprocessor module – up to 16 channels.
USB audio port enables soft-codecs + record/playback.
Dedicated routing resources for a 128×128 Super Matrix.
4-port Gigabit Switch serves Dante + control networks.
Ultra-low noise preamps with 3 dB gain steps.
Support for Radius and Edge Expansion Cards.

Specifications

General Specifications

Processor	1 x Analog Devices Griffin ADSP-SC587 dual- core DSP @ 500 MHz
Raw processing capacity	500 MIPS, 6 GFLOPS, 2 GMACS
Sampling rate	48 kHz, ± 100 ppm.
Frequency response (A/D/A)	20 Hz – 20 kHz, ± 0.5 dB.
Dynamic range (A/D/A)	> 114 dB, A-weighted.
Channel separation (A/D/A)	> 110 dB @ 1 kHz, +24 dBu
Latency (A/D/A)	1.04 ms, inputs routed to outputs
Delay memory	174 mono seconds.
Analog control inputs	0-3.3 VDC.
Recommended external control potentiometer	10k Ohm, linear.
Logic outputs	Low (0V) when active, pulled high (5V) when inactive.
Logic output maximum external power supply voltage / current sinking	24 VDC / 50 mA.
Logic output maximum output current	10 mA.
THD + Noise	< -95 dB (22.4 kHz BW, unweighted); 1 kHz @ +15 dBu with 0 dB gain
RS-232 accessory serial I/O	57.6 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required
RS-485 serial I/O	38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
Ethernet Cable	Standard CAT5/6, maximum device to device length = 328 feet / 100 meters
Dante Cable	Standard CAT6, maximum device to device length = 328 feet / 100 meters
ARC Cable	Standard CAT5/6, distance dependent upon load and number of devices
Maximum stored presets	1000.

Analog Inputs

Connectors	3.81 mm terminal blocks.
Number of inputs	Four (4) switchable balanced mic or line level
Nominal input level	+4 dBu
Maximum input level	+24 dBu
Mic Pre-amp Gain	0 to 51 dB in 3 dB steps with ± 24 dB digital trim
Mic Pre-amp EIN	< -125 dB with 150 Ohm source impedance, 22.4 kHz BW
CMRR	> 50 dB @ 1 kHz, unity gain
Input impedance	2k Ohms balanced, 1k Ohms unbalanced
Phantom Power (Per Input)	+48 VDC @ 10 mA maximum.
Dynamic range	> 115 dB, A-weighted.
THD + Noise	< -100 dB (22.4 kHz BW, unweighted); 1 kHz @ +15 dBu with 0 dB gain.
Latency	0.31 mS

Analog Outputs

Connectors	3.81 mm terminal blocks.
Number of outputs	Four (4) balanced line level
Nominal output level	+4 dBu with 20 dB of headroom.
Maximum output level	+24 dBu (+22.8 dBu into a 2 k Ohm minimum load).
Output impedance	300 Ohms balanced, 150 Ohms unbalanced.
Dynamic range	> 117 dB, A-weighted.
THD + Noise	< -97 dB (22.4 kHz BW, unweighted); 1 kHz, 0 dB gain +8 dBu output
Latency	0.65 mS.

AEC

Number of Channels	Dual-core module: For standard conferencing, up to sixteen (16) channels with two (2) references. For mix-minus applications, up to eight (8) channels with eight (8) references. Single-core module: For standard conferencing, up to eight (8) channels with one (1) reference. For mix-minus applications, up to four (4) channels with four (4) references.
Tail Length	400 mS maximum, dependent on channel and reference count
Convergence Rate	Typically > 90dB/sec
Latency	11 mS
Processors	1 x Analog Devices Griffin ADSP-21584 dual-core DSP @ 500 MHz
Raw processing capacity	500 MIPS, 6 GFLOPS, 2 GMACS
	*Optional coprocessor module required, single-core or dual-core models are available.

USB Audio I/O

Connector	One (1) high-retention Type B
Interface	2.0 with Audio class 1.0 legacy modes
Capacity	1x1 (echo cancelling speakerphone and non-echo cancelling speakerphone modes) - driverless, 2x2 line I/O mode - driverless, and 8x8 line I/O mode - driver included
Sample Rate	48 kHz
Bit Depth	16-bit, speakerphone modes; 16 or 24-bit, line modes

Mechanical Data

Space Required	1U (WDH: 18.91 in. x 9.5 in. x 1.72 in. / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical	100-240 VAC, 50/60 Hz, 60 Watts maximum, universal input.
Ventilation	Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight	13 lbs. (5.9 kg).
Certifications or Compliance	Safety: UL 60065, cUL 60065, IEC 60065 EMC: EN 55103-1, EN 55103-2, EN55032, EN 61000-3-2, EN 61000-3-3, ICES-003, FCC Part 15 (all Class A) Environmental: RoHS

Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)

Vendor: Symetrix

Related Product

Symetrix W1, Black, Euro IP remote with push-button rotary encoder, OLED display, PoE, Decora single-gang Euro version, black

Symetrix CS SymVue App CS SymVue App, 5 licenses. Electronic distribution. No media

Symetrix CS Mixer App CS Mixer App, 5 licenses. Electronic distribution. No media

Symetrix Control Server Browser-based SymVue server with integrated Wi-Fi (802.11a/b/g/n), 5 Mixer App licenses, 5 SymVue App licenses, 1/2 rack width

Symetrix xControl Control endpoint with 8 GP inputs, 16 GP outputs, 2 RS232, PoE, 1/2 RU

Symetrix RC-3 Remote Control Black GPI remote with analog potentiometer, Decora single-gang, black

Symetrix RC-3 Remote Control White GPI remote with analog potentiometer, Decora single-gang, white

Symetrix ARC-PSe Power supply for ARC remotes, 1/2 rack width, mounting hardware sold separately

Symetrix ARC-EX4e Control expander for ARC-K1e or ARC-SW4e with 4 buttons, 4 LEDs, Decora single-gang, faceplate not included

Symetrix ARC-SW4e Black ARC remote with 4 buttons, 4 LEDs, Decora single-gang, black

Symetrix ARC-SW4e White ARC remote with 4 buttons, 4 LEDs, Decora single-gang, white

Symetrix ARC-K1e Black ARC remote with rotary encoder, 2 buttons, LED meter, Decora single-gang, black

Symetrix ARC-K1e White ARC Remote with rotary encoder, 2 buttons, LED meter, Decora single-gang, white

Symetrix ARC-2e Black ARC remote with 3 buttons, 8-character display, single-gang, black

Symetrix ARC-2e White ARC remote with 3 buttons, 8-character display, single-gang, white

Symetrix ARC-3 Black ARC remote with 2 capacitive buttons, capacitive fader, OLED display, surface and wall mount options included, black

Newsletter

Special Services

My account

Customer service

contact info

Symetrix AEC Module, AEC-2 Dual Core AEC Coprocessor, 16/12 channels (dual/independent references)

Vendor: Symetrix

Related Product

Call for Price