Symetrix EDGE Dante Programmable DSP, 4 I/O card slots, 64x64 redundant Dante, ARC

Vendor: Symetrix
Symetrix EDGE Dante Programmable DSP, 4 I/O card slots, 64x64 redundant Dante, ARC Total Input/Output Flexibility Four versatile option card slots Customize I/O configurations with support for analog, AES-3 digital, USB, AEC, VoIP,...
$3,933.00
Title

Symetrix EDGE Dante Programmable DSP, 4 I/O card slots, 64x64 redundant Dante, ARC

Total Input/Output Flexibility

  • Four versatile option card slots

  • Customize I/O configurations with support for analog, AES-3 digital, USB, AEC, VoIP, and analog telephone interfaces

Dante™ Network Audio (Optional)

  • Factory-installed 128-channel (64×64) redundant Dante support

  • Seamless integration with Dante-enabled microphones, amps, speakers, and more

  • Optional non-Dante version available for standalone systems at a lower cost

Built-in Networking

  • Onboard 10/100 and Gigabit switches

  • Reduce external hardware and increase system reliability

Unlimited Programming with Composer Software

  • Open-architecture DSP programming

  • Native integration with Symetrix and third-party Dante hardware

  • No need for multiple software platforms

Flexible Control Options

  • Compatible with Symetrix ARC wall panels

  • Custom virtual interfaces using SymVue for Windows

  • Human-readable Composer Control Protocol for third-party touchscreen devices

Embedded Web Server

  • Real-time I/O monitoring and system diagnostics

  • Host ARC-WEB for browser-based control via smartphones, tablets, or computers

Processor 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD
Raw Processing Capacity 400 MIPS, 1.6 GFLOPS
Sampling Rate 48 kHz, ± 100 ppm
Frequency Response (A/D/A) 20 Hz – 20 kHz, ± 0.5 dB
Dynamic Range (A/D/A) 114 dB, A-weighted
Channel Separation (A/D/A) 108 dB @ 1 kHz, +24 dBu
Latency (A/D/A) 0.88 mS, inputs routed to outputs
Delay Memory 174 mono seconds per Edge frame
Analog Control Inputs 0-3.3 VDC
Recommended External Control Potentiometer 10k Ohm, linear
Logic Outputs Low (0 V) when active, pulled high (5 V) when inactive
Logic Output Maximum External Power Supply Voltage 24 VDC
Logic Output Maximum External Power Supply / Current Sinking 50 mA
Logic Output Maximum Output Current 10 mA
RS-232 Accessory Serial I/O 38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight through, only pins 2, 3, and 5 required
RS-485 Serial I/O 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
Ethernet Cable Standard CAT5/6, maximum device to device length = 100 m
Dante Cable Standard CAT5/6, maximum device to device length = 100 m
ARC Cable Standard CAT5/6, distance dependent upon load and number of devices
Maximum Devices per System 32 units per Site File
Maximum Stored Presets 1,000

Mechanical Specifications

Space Required 1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3-inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical 100-240 VAC, 50/60 Hz, 45 Watts maximum universal input and/or suitable 24 VDC / 2.0 Amp auxiliary power source. No line voltage switching required.
Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight 13 lbs (5.9 kg)
Certifications and Compliance UL 62368-1, cUL 62368-1, IEC 62368-1, EN 55103-1, EN 55032, EN 55103-2, FCC Part 15; UKCA; EAC; RoHS.