Symetrix Jupiter 4 App-based DSP, 4 mic/line in, 4 line out, ARC

Symetrix Jupiter 4 App-based DSP, 4 mic/line in, 4 line out, ARC

Introducing Jupiter.

Jupiter delivers powerful digital signal processing in a turnkey audio solution designed with simplicity in mind, inspired by the intuitive 'apps' approach seen in smartphones like the iPhone. Built on the foundation of Symetrix’s renowned SymNet DSP platform, Jupiter maintains a strong commitment to exceptional sound quality.

Hardware: Choice made simple.

The three Jupiter hardware models vary only in their audio input and output configurations, while all share the same software platform and DSP capabilities, ensuring a straightforward and flexible hardware selection process.

Software: Easy from the start.

Just like using productivity apps on your smartphone, you use Jupiter apps to do specific audio jobs with a simple download to Jupiter hardware. Tap into one of the multiple personalities of Jupiter – no design time, zero learning curve. Jupiter handles every task from automixing to loudLive Sound > Signal Processing > Speaker Management. The ever-growing library of downloadable Jupiter apps future-proofs your hardware investment.
 
Engineered by Symetrix.

Jupiter brings you controllable and simple to use audio DSP. Engineered and built in the US by Symetrix… Explore Jupiter.

Features

• A turn-key audio processing solution utilizing a library of downloadable apps. Installation is quick and easy.
• Over 60 apps in categories including mixing and routing public address and distribution, sound reinforcement, and special-purpose signal processing.
• Multiple user control options include zero-cost ARC-WEB browser-based interface, low-cost Symetrix ARC wall panels, and programmable third-party touch screens.
• 4 input 4 output hardware has an abundance of DSP to power apps that are packed with processing features such as Dynamics EQ FIR Filters, Feedback Fighters LoudLive Sound > Signal Processing > Speaker Management, Automixing, and Matrixing.
• High feature to cost ratio and minimal set-up saves time and money.

• Inputs
  • Number of Inputs: four (4) switchable balanced mic or line level
  • Connectors: 3.81 mm terminal blocks
  • Nominal Input Level: +4 dBu line or -36 dBu mic level (software selectable) with 20 dB of headroom
  • Mic Pre-amp Gain: +40 dB
  • Input Trim: +/- 24 dB
  • Maximum Input Level: +23 dBu
  • Input Impedance: > 18 kOhms balanced, > 9 kOhms unbalanced, > 2 kOhms with phantom power engaged
  • CMRR: > 50 dB @ 1 kHz, unity gain
  • Mic Pre-amp EIN: < -125 dBu, 22 Hz - 22 kHz, 100 Ohms source impedance
  • Phantom Power: +20 VDC, 20 mA maximum per input
• Outputs
  • Number of Outputs: Four (4)
  • Connectors: 3.81 mm terminal blocks
  • Nominal Output Level: +4 dBu line level with 20 dB of headroom. For unbalanced analog output, do not connect the minus output terminal. Unbalanced configuration results in 6 dB lower output level
  • Maximum Output Level: +24 dBu
  • Output Impedance: 200 Ohms balanced, 100 Ohmsunbalanced
• System
  • Sample Rate: 48 kHz
  • Frequency Response: 20 Hz - 20 kHz, +/- 0.5 dB
  • Dynamic Range: > 110 dB (A-Weighted), input to output
  • THD+Noise: < -85 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain
  • Interchannel Crosstalk: < -90 dB @ 1 kHz, typical
  • Latency: < 1.6 ms, input to output with all DSP inactive
• SPACE REQUIRED:
  • 1U (WDH: 48.02 cm x 19.05 cm x 4.37 cm / 18.91 in x 7.5 in x 1.72 in), depth is specified from front panel  to back of connectors
  • Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections
  • ELECTRICAL:
  • 100-240 VAC, 50/60 Hz, 25 Watts maximum
  • Universal input
• VENTILATION:
  • Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
• CERTIFICATIONS OR COMPLIANCE:
  • UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS