FREE CHURCH DESIGNS
Call us 1-877-477-6432 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Symetrix Prism 4x4 Dante Programmable DSP, 4 mic/line in, 4 line out, PoE+, 64x64 Dante, ARC, 1/2 rack width
Vendor: Symetrix
Description
Symetrix Prism 4x4 Dante Programmable DSP, 4 mic/line in, 4 line out, PoE+, 64x64 Dante, ARC, 1/2 rack width
Prism DSPs are equipped with 128 (64×64) Dante channels, utilizing the Dante protocol for ultra-reliable multi-channel audio networking over IP. This collaboration between Symetrix and Dante offers the fastest way to implement, control, and maintain a system of networked DSPs and accessories, including third-party Dante-enabled microphones, loudspeakers, power amplifiers, and mixing consoles.
Features
Specifications
| Number of Inputs | Four (4) switchable balanced mic or line level. |
| Connectors | 3.81 mm terminal blocks. |
| Nominal Input Level | +4 dBu. |
| Maximum Input Level | +23 dBu. |
| Mic Pre-amp gain | 0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim. |
| Mic Pre-amp EIN | < -125dB with 150 ohm source impedance. 22.4 kHz BW. |
| CMRR | > 79 dB @ 1 kHz, unity gain. |
| Input impedance | 8k Ohms balanced, 4k Ohms unbalanced. |
| Phantom power (per input) | +48 VDC, 10 mA maximum. |
| Dynamic range | > 113 dB, A-weighted. |
| THD+Noise | < -100 dB; 22.4 kHz BW, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Course gain is set to +4dBu. |
| A to D Latency | 0.28 mS. |
Mechanical Specifications
| Space Required | Half rack unit (WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections. |
| Electrical | PoE+ IEEE 802.3at Class 4, 25.5 Watts maximum. No line voltage switching required. Note: Subject to change when actual power requirements are determined. |
| Ventilation | Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc. |
| Certifications or Compliance | Safety: UL 60065, cUL 60065, IEC 60065. EMC: “Class A” device (applies to all of the following) EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environmental: RoHS. |
| Shipping Weight | 5.2 lbs. (2.4 kg) |
Analog Outputs
Number of Outputs Four (4) balanced line level. Connectors 3.81 mm terminal blocks. Nominal Output Level +4 dBu with 20 dB of headroom. Maximum Output Level +24 dBu (+22.8 dBu into a 2k Ohm minimum load). Output Impedance 300 Ohms balanced, 150 Ohms unbalanced. Dynamic Range > 117 dB, A-weighted. THD+Noise < -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output. D to A Latency 0.60 mS.
