Yamaha PX10 Powerful 2 Channel Power Amplifer with DSP Processing 1200W X2

Vendor: Yamaha
Yamaha PX10 Powerful 2 Channel Power Amplifier with DSP Processing 1200W X2 The Yamaha PX10 Dual Channel Amplifier is a flexible PX series power amplifiers lineup and merges its intelligent processing with high output power...
$949.99 $1,304.00
Title

Yamaha PX10 Powerful 2 Channel Power Amplifier with DSP Processing 1200W X2

The Yamaha PX10 Dual Channel Amplifier is a flexible PX series power amplifiers lineup and merges its intelligent processing with high output power to meet the requirements of a broad range of sound reinforcement environments. 1000W x 2 at 8Ω / 1200W x 2 at 4Ω.

Yamaha PX10 Powerful 2 Channel Power Amplifier with DSP Processing 1200W X2 Product Highlights

  • 2x 1000W at 8Ω
  • 2x 1200W at 4Ω
  • Newly developed Class-D amplifier engine with a custom LSI
  • Flexible onboard PEQ, crossover, filters, delay, and limiter functions
  • Yamaha Speaker presets
  • Utlities for safe and secure operation

Intelligent Processing. Serious Power.

Since the 1976 release of the P2200, our first professional power amplifier, Yamaha has strived to achieve the highest possible levels of sound quality, power output, and reliability in sound reinforcement, studio, and installed applications. The new PX series power amplifiers continue this tradition of excellence, utilizing Yamaha’s renowned digital signal processing technology and unparalleled professional audio expertise to achieve a light, durable design, capable of delivering the maximum output power to the speakers while simultaneously protecting them with optimized processing. Driven by a newly-developed Class-D amplifier the four new models that make up the PX series are suitable for a broad range of sound reinforcement and installation environments.

100V models

Output power; 1kHz Non-clip 20msec Burst Both channels driven

  • 8Ω - 1000W x 2
  • 4Ω - 1200W x 2
  • 2Ω - 700W x 2

120V models

 Output power; 1kHz Non-clip 20msec Burst Both channels driven

  • 8Ω - 1000W x 2
  • 4Ω - 1200W x 2
  • 2Ω - 700W x 2

220V-240V models

Output power; 1kHz Non-clip 20msec Burst Both channels driven

  • 8Ω - 1000W x 2
  • 4Ω - 1200W x 2
  • 2Ω - 700W x 2

General Specifications

  • Sampling frequency rate / Internal - 48kHz
  • A/D D/A Converters - AD/DA: 24-bit linear, 128 times over sampling
  • Total harmonic distortion - 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
  • Frequency response - ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
  • S/N ratio - 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
  • Crosstalk - Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)

Voltage Gain/Sensitivity

  • 8Ω Volume max - 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
  • Maximum input voltage - +24dBu
  • Input impedance - 20kΩ (Balance), 10kΩ (Unbalance)

I/O Connectors

  • Speaker output ports - Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
  • Line Input - XLR-3-31 x2, 1/4 "PHONE(TRS) x2
  • Others - USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp
  • Indicators - POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature
  • Processors - Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay)
  • Latency - 1.5 msec (Analog Input to Speakers)
  • Presets - 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)

Protection circuit

  • Load protection - POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user-configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
  • Amplifier protection - Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Overcurrent: Output mute (Restored automatically); Overvoltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
  • Power supply protection - Thermal: Output limiter (Restored automatically) → Power supply shutdown; Overvoltage: Power supply shutdown; Overcurrent: Power supply shutdown
  • Amplifier class - Class D, Balanced output circuit (BTL)
  • Cooling - 16 step variable speed fan x 2, front to rear airflow
  • Power requirements - Depending on the area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.
  • Power consumption - 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)
  • Dimensions W - 480mm (18-7/8")
  • Dimensions H - 88mm (3-7/16"): 2U
  • Dimensions D - 388mm (15-2/8")
  • Net weight - 7.4 kg (16.31 lbs)
  • Accessories - USB cover, Owner's Manual, Specification Sheet, AC cable (2.0m) x 1
  • Others - Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C