Community CS6-B (Black) / Community CS6-W (White) 6.5-Inch 2-Way Surface Mount

Community CS6-B (Black) / CS6-W (White) 6.5-Inch 2-Way Surface Mount

The Community CS6-B for Black and Community CS6-W for White, Commercial Design Series surface mount speaker is a professionally designed full-range, compact, two-way system, made ideal for use in installations where space is a premium. Easily outperforming loudspeakers of a larger size format, the CS6-B comes providing high power handling, high sensitivity and realistic sound reproduction. It comes with a clean and simple architectural appearance that is capable to aesthetically merges well in most environments, combined along with weather-resistant capability suitable intended for outdoor use, the CS6-B is possible to be used in a wide variety of speech and music applications. It comes equipped along with a built-in autoformer, this allows the large numbers of distributed loudspeakers to be powered from a 70V or 100V amplifier output. A convenient front accessible power tap switch is made hidden behind a rotatable logo. Installation is simple and flexible with the use of the included multi-angle pan-and-tilt wall mounting yoke which is allowing the low profile mounting and precise positioning of the enclosure in either horizontal or vertical mounting orientation.

Features

• Clean and simple architectural design
• Same components and voicing as the Commercial Design ceiling loudspeaker family
• High efficiency, high output, high intelligibility, low distortion
• Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
• Front-accessible power tap switch for selectable 8 Ohm or 70V/100V operation
• Low profile pan-tilt mounting yoke included
• Horizontal or vertical mounting orientation
• Weather-resistant construction with treated drivers, two-layer powder coated grilles and protected wiring ingress

• Loudspeaker Type: Two-way, full-range, coaxial surface mount loudspeaker, 8 ohm or 70V/100V operation
• Operating Range: 65 Hz - 13.5 kHz (-10 dB)
• Frequency Response: 90 Hz - 12.5 kHz (-3 dB)
• Max Input Ratings (8 Ohm): 60W continuous, 150W program, 22 volts RMS, 43.8 volts momentary peak
• Transformer Taps:
• 70V: 30W, 15W, 7.5W, 3.75W and 8 Ohm selectable
• 100V: 30W, 15W, 7.5W, and 8 Ohm selectable
• Sensitivity (1W/1m): 90 dB SPL (90 Hz to 12.5kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range)
• Maximum Output: 108 dB SPL / 114 dB SPL (peak 8 Ohm)
• Nominal Impedance: 8 Ohms
• Minimum Impedance: 6.4 Ohms @ 10 kHz
• Nominal Coverage: 120º conical (+60° / -60°, 1 kHz to 6 kHz)
• Axial Q / DI: 4.8 / 6.8, 500 Hz to 6 kHz
• Crossover Frequency: 2 kHz
• Recommended Signal Processing: 70 Hz, 24 dB/Oct high pass filter
• Drivers: LF 1x 6.5" cone, HF 1x 3/4" exit compression driver
• Driver Protection: Self-resetting solid state circuit breaker
• Input Connection: 4-pole Euroblock connector with two pair of non-interrupt parallel connections
• Controls: Front-accessible wattage / low impedance selector switch hidden behind the rotatable logo
• Enclosure: ABS plastic, matte finish, paintable
• Finish: Black
• Mounting/Rigging Provisions: Low profile, multi-angle, pan-tilt mounting yoke
• Grille: Dual-layer powder coated steel, black finish
• Safety Features: Built-in safety cable attachment eyebolt
• Environmental: IP55 rated loudspeakers, IP56 rated connector cover, designed to Mil Spec 810
• Required Accessories: Electronic high pass filter
• Supplied Accessories: Low profile, pan-tilt mounting yoke; flat-head screwdriver
• Optional Accessories: M8 x 15.5mm Blind Insert for 3rd party accessory attachment
• Dimensions:
• Height: 6.96 inches (177 mm)
• Width: 11.8 inches (300 mm)
• Depth: 10.7 inches (272 mm)
• Weight (without bracket): 7.1 lbs (3.2 kg)
• Weight (with bracket): 9 lbs (4.1 kg)