Community ENT212B (Black) / ENT212W (White) ENTASYS 200 Column, 2-Way 12 LF Drivers

Vendor: Community
Community ENT212B (Black) / ENT212W (White) ENTASYS 200 Column, 2-Way 12 LF Drivers The Community ENT212B for Black and ENT212W for White, is professionally designed as an all-weather column line array housed in an...

Community ENT212B (Black) / ENT212W (White) ENTASYS 200 Column, 2-Way 12 LF Drivers

The Community ENT212B for Black and ENT212W for White, is professionally designed as an all-weather column line array housed in an attractive, heavy duty extruded PVC enclosure. Twice the height of the ENT206, the ENT212 is capable of providing a vertical directional control at far lower frequencies than the ENT206, plus enough power for use in covering a medium-sized venues as the primary system. The ENT212 do excels a lot in noisy environments - gymnasiums and other athletic venues are just two of many examples - while its high-fidelity response is capable of making it suitable for more subtle applications such as scholastic auditoriums, jazz and folk music clubs, corporate AV presentations, houses of worship, and much more. The excellent vertical directivity are conquering large, reverberant spaces, that provides excellent intelligibility and musicality. With the addition of subwoofers, an ENT212 system is made for capable of meeting a vast range of requirements, from the soccer stadium to the performing arts center. The ENT212 is employing twelve high-power LF cone drivers and four Community CRE (Compact Ribbon Emulator) HF tweeter arrays in a single-amped configuration that is employing a 4-way frequency shaded crossover.

All ENTASYS 200 models are available in standard black or white finishes, include selectable low impedance or 70/100-volt operation, a rugged pan-tilt mounting bracket and a permanently mounted safety eyebolt. The paintable enclosures share a 4-5/8-inch wide by 7-1/2-inch deep “teardrop” footprint.


  • Advanced passive crossover technology
  • Dynamic protection circuitry
  • Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control
  • All-weather construction for indoor/outdoor usage
  • Selectable low impedance or 70V/100V operation
  • Simple installation using the included pan-tilt mounting bracket
  • Tightly controlled vertical dispersion reduces harmful room reflections
  • Wide horizontal dispersion means fewer units cover a given area
  • Clean, clear and powerful sonic output without the cost of bi-amplification
  • Available in standard black or white finishes, may also be painted to match room décor
  • Loudspeaker Type:  Two-way, column array loudspeaker, 8 Ohm or 70V/100V operation
  • Operating Range:  100 Hz to 22 kHz (-10 dB)
  • Frequency Response:  160 Hz to 20 kHz (-3 dB)
  • Max Input Ratings (8 Ohm):  325W continuous, 800W program, 51 volts RMS, 102 volts momentary peak
  • Autoformer Taps:
    • 70V:  120W, 60W, 30W, 15W, 7.5W
    • 100V:  120W, 60W, 30W, 15W
  • Sensitivity (1W/1m):  96 dB (160 Hz - 20 kHz) full space
  • Maximum Output:  121 dB SPL / 127 dB SPL (peak)
  • Nominal Impedance:  8 Ohms
  • Minimum Impedance:  8.5 Ohms @ 400 Hz
  • Vertical Coverage:  15° (2 kHz - 16 kHz +/- 15°) @ 13m
  • Horizontal Coverage:  140° average (1 kHz - 10 kHz +/- 20°)
  • Crossover Frequency:  5000 Hz
  • Recommended Signal Processing:  100 Hz, 24 dB/Oct high pass filter
  • Drivers:
    • LF: (12) 80mm long excursion mylar drivers
    • HF:  (4) 3-element Compact Ribbon Emulators
  • Driver Protection:  Dynamic protection circuitry
  • Input Connection:  NL4 Speakon-type connector for low impedance operation; and 8-position terminal strip for low impedance or constant voltage operation
  • Controls:  None
  • Enclosure:  Extruded, high gloss paintable PVC
  • Finish:  Black or white
  • Grille:  Dual-layer powder coated steel, black or white finish
  • Safety Features:  Built-in safety eyebolt
  • Environmental:  Outdoor Direct Exposure Certified IP54W per IEC529 for UV, moisture and salt spray
  • Required Accessories:  High pass filter
  • Supplied Accessories:  Pan-tilt bracket accommodating zero to 9° down-tilt and +/- 55° panning; and ABS plastic rain cover with integrated cable inlet and 1" (25.4mm) knockout for conduit ingress
  • Optional Accessories:
    • E200-UMK universal mounting kit
    • E200-SAK stand adapter kit
  • Dimensions:
    • Height:  39.1 inches (993 mm)
    • Width:  4.62 inches (117 mm)
    • Depth:  7.47 inches (189 mm)
  • Weight (without bracket):  28 lbs (12.7 kg)