Dynacord C1300FDI-US, DSP 2 x 650 w power amplifier for fixed install applications

Vendor: Dynacord
Dynacord C1300FDI-US, DSP 2 x 650 w power amplifier for fixed install applications Dynacord C1300FDI-US C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal processing provides access...
$969.00
Title

Dynacord C1300FDI-US, DSP 2 x 650 w power amplifier for fixed install applications

Dynacord C1300FDI-US C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal processing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilizes Class A/B resp. Class H topologies, which provide market-leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For a low cost of ownership, a power-saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control, and comprehensive supervision.

Dynacord C1300FDI-US Main Features

  • Professional DSP amplifier for live and mobile application
  • Fully integrated professional speaker processing with FIR drive technology
  • Market-leading acoustic performance and rock-solid reliability
  • Intuitive, simplified set-up, control, and operation in SONICUE sound system software with firmware 2.0

Load Impedance 2 Ω 2.6 Ω 4 Ω 8 Ω
Maximum Output Power, Single Channel  1100 W 950 W 660 W 350 W
Maximum Output Power, Dual Channel  1000 W 850 W 600 W 320 W
Maximum Output Power, Bridged  - - 2000 W 1200 W
Direct Drive
Load Capability
Dual-Channel Bridged
 70 V Operation
 Not available2
 1 x 625 W (0.0 dB)
100 V Operation
Not available2
Not available2
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
55.3 V
Voltage Gain Ref.1 kHz 32.0 dB
THD at 450 W/4Ω MBW = 80 kHz, 1kHz < 0.05%
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM30, 3.15 kHz, 15 kHz < 0.05%
Maximum Input Level +21 dBu
Crosstalk ref. 1 kHz, at 100W/4 Ω < -80 dB
Frequency Response, ref. 1 kHz 10 Hz to 21 kHz (±1 dB)
Input Impedance, Active Balanced 20 k Ω
Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8  Ω >104 dB
Output Noise, A-weighted < -68 dBu
Output Stage Topology Class AB
Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption ⅛ Maximum Output Power @ 4 Ω 550 W
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5°C to +40°C (40°F to +105°F)
Safety Class I
Color Black
Dimensions (W x H x D), mm 483 x 88 x 462.4
Weight 12.9 kg (28.4 lb)
Remote Power ON/GPIO Power remote via a switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Signal Processing FIR filters, audio limiters, output, and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, the load impedance
Remote Control SONICUE sound system software **
Accessories RMK15 (rear rack mount kit)