Dynacord C3600FDI-US, DSP 2 x 1800 w power amplifier for fixed install applications

Vendor: Dynacord
Dynacord C3600FDI-US, DSP 2 x 1800 w power amplifier for fixed install applications Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Besides low impedance operation (2 Ohms, 4...
$1,859.00
Title

Dynacord C3600FDI-US, DSP 2 x 1800 w power amplifier for fixed install applications

Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Besides low impedance operation (2 Ohms, 4 Ohms, or 8 Ohms) C3600FDi can drive 100 V loudspeaker lines directly (‑1.5 dB) without output transformers. Integrated digital signal processing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilizes Class A/B resp. Class H topologies, which provide market-leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For the low cost of ownership, a power-saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control, and comprehensive supervision.

Dynacord C3600FDI-US Main Features

  • Professional DSP amplifier for live and mobile application
  • Fully integrated professional speaker processing with FIR drive technology
  • Market-leading acoustic performance and rock-solid reliability
  • Intuitive, simplified set-up, control, and operation in SONICUE sound system software with firmware 2.0
Load Impedance 2 Ω 2.7 Ω 4 Ω 8 Ω
Maximum Output Power, Single Channel  3200 W 2700 W 1800 W 950 W
Maximum Output Power, Dual Channel  3000 W 2500 W 1700 W 900 W
Maximum Output Power, Bridged  - - 6000 W 3400 W
Direct Drive
Load Capability
Dual-Channel Bridged
 70 V Operation
 Not recommended
 Not recommended1
100 V Operation
2 x 1250 W (-1.5 dB)
Not recommended
Maximum RMS Voltage Swing THD = 1%, 1 kHz 96.6 V
Voltage Gain Ref.1 kHz 32.0 dB
THD at 900 W/4 Ω MBW = 80 kHz, 1kHz < 0.05%
IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
DIM30,3.15 kHz, 15 kHz < 0.05%
Maximum Input Level +21 dBu
Crosstalk ref. 1 kHz, at 100W/4 Ω < -80 dB
Frequency Response, ref. 1 kHz 10 Hz to 21 kHz (±1 dB)
Input Impedance, Active Balanced 20 k Ω
Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω >109 dB
Output Noise, A-weighted < -68 dBu
Output Stage Topology Class H
Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption ⅛ Maximum Output Power @ 4 Ω 850 W
Mains Fuse 240 V/230 V: T15AH; 120 V/100 V: T30AH
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
Cooling Front-to-rear, 3-stage-fans
Ambient Temperature Limits +5°C to +40°C (40°F to +105°F)
Safety Class I
Color Black
Weight 18.2 kg (40.1 lb)
Remote Power ON/GPIO Power remote via a switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Signal Processing FIR filters, audio limiters, output, and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, the load impedance
Remote Control SONICUE sound system software **
Accessories RMK15 (rear rack mount kit)