Electro Voice CPS4.10 4-Channel Power Amplifier, 4 x 1000W into 2, or 4 Ohms, or 70V/100V Direct Drive

Vendor: Electro Voice
Description Electro Voice CPS4.10 4-Channel Power Amplifier, 4 x 1000W into 2, or 4 Ohms, or 70V/100V Direct Drive The Electro Voice CPS4.10 is a 4 x 1000W Power Amplifier that is designed capable...
$4,074.95
Title

Electro Voice CPS4.10 4-Channel Power Amplifier, 4 x 1000W into 2, or 4 Ohms, or 70V/100V Direct Drive

The Electro Voice CPS4.10 is a 4 x 1000W Power Amplifier that is designed capable to offer four independent Class-D Variable Load Drive (VLD) amplifier blocks, each of the blocks is capable to deliver up to 1000 Watts into Low-Z or High-Z loads. By default, each channel is able to be configured individually for maximum output of power into either 2 Ohms , 4 Ohms , 70V- or 100V networks without having any involvement of any output transformers. The Electro Voice CPS4.10 is surely dependable, since it is being designed for professional audio installation market, special care was taken for long term cost of ownership parameters: Additionally, aside from its remarkably low current consumption and heat dissipation, the Electro Voice CPS4.10 is capable to provide remote standby switching with just 5 Watts consumption in standby mode.

  • Four channels in one compact rack-efficient unit
  • 1000 W per channel
  • 70/100 V operation for distributed systems
  • Class-D design for optimum efficiency
  • Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
  • IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
  • Rear-mounted attenuators
  • Switchable 50 Hz high-pass filter (Hi-Z mode)
  • Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Programmable power-on delay settings
  • Front-to-rear fans
Weight Net 24.47lbs (11.1kg)
Depth 16.59" (421.5mm)
Width 19" (482.6mm)
Height 3.47" (88.1mm)
Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36dB ((100V))
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v 1000Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1000Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1000Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 1000Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 500Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 900Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 900Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 900Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 450Watts
Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02%
Electronics Type Amplifier
Frequency Response (-3 dB) 15 Hz-30 kHz
Impedance 2/4/8/8 VLD/70 V/100VΩ
Input Impedance (Balanced) 20kΩ
Input Sensitivity 0 dBu (.775V)-2ω, +3 dBu (1.1V)-4/8ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05%
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω 2000Watts
Maximum Bridged Output 8Ω 2000Watts
Maximum Input Voltage +22 (9.76 Vrms)
Network Control (IRIS-Net) Optional (RCM-810 card)
Signal-to-Noise Ratio (A-weighted) 103dB
Slew Rate 28V/µs
Topology Class-D
Total Harmonic Distortion 0.05%
Variable Load Drive (VLD) Yes