← Previous Product Next Product →

QSC CX204V 4 channels, 200 watts/ch at 70V

Name: QSC CX204V 4 channels, 200 watts/ch at 70V
Brand: QSC
SKU: CX204V
Price: 1750.00 USD
Availability: InStock

Vendor: QSC

Description QSC CX204V 4 channels, 200 watts/ch at 70V With this 4-channel CX amplifiers it can give you four channels, without compromising the power, in only two rack spaces. You can choose from...

or Call for pricing: 1-877-477-6432

Description

QSC CX204V 4 channels, 200 watts/ch at 70V

With this 4-channel CX amplifiers it can give you four channels, without compromising the power, in only two rack spaces. You can choose from three models, two low-impedance versions and a one direct 70 volt model. Each of this model is crafted with exclusive QSC Powerlight™ switching power supply technology to eliminate the hum and noise virtually. The CX Series is the perfect solution because it is designed with high-thermal capacity, high-output power, versatile loading options and unmatched reliability, to any permanently installed sound system. One of this amplifier is QSC CX204V 4 channels, 200 watts/ch at 70V.

Features

Compact size — only 2 RU and 14" deep for reduced rack cost and floor space
Bridgeable channels 1 + 2 and 3 + 4, for maximum flexibility
Active inrush limiting eliminates AC inrush current, removing the need for expensive power sequencers
HD15 DataPort connector for Q-SYS networked control and monitoring
Custom integrated security cover for tamper-proof installations
Variable-speed fan for low noise
1-dB detented gain controls for fast and accurate gain settings
Detachable Euro style input connectors
DIP switch control for clip limiters, high pass filters, bridge mono and parallel operation
Exclusive PowerLight switch-mode power supply technology for high performance and compact size
Selectable high-pass filters protect speakers and prevent speaker transformer saturation with minimal effect on program material (50 Hz or 75 Hz)
Comprehensive front panel indicators including signal, clip, protect and QSC's exclusive bridge mono and parallel input LEDs
Barrier strip output connector
Comprehensive protection circuitry including DC, infrasonic, thermal overload and short circuit protection
High-performance Class AB+B complementary bipolar output circuitry
Lightweight—all models only 21 pounds (9.5 kg) for easier racking and shipping
3-year warranty plus optional 3-year extended service contract
All CX Series amplifiers meet the European Union's, 2006 RoHS directive to restrict the use of hazardous materials used in electronic devices.

Specification

SPECIFICATIONS	CX204V

8Ω, 20 Hz–20 kHz 0.05% THD	-
4Ω, 20 Hz–20 kHz 0.05% THD	-
2Ω, 1 kHz 1% THD	-
70 V, 20 Hz–20 kHz 0.05% THD	200 W
70 V, 1 kHz 0.05% THD	220 W
70 V, 1 kHz 1% THD	300 W
	POWER, BRIDGED MONO MODE
16Ω, 20 Hz–20 kHz 0.1% THD	-
8Ω, 20 Hz–20 kHz 0.1% THD	-
4Ω, 1 kHz 1% THD	-
140 V, 20 Hz–20 kHz 0.1% THD	400 W
140 V, 1 kHz 0.05% THD	440 W
140 V, 1 kHz 1% THD	600 W
Noise, 20 Hz–20 kHz	>106 dB
Input Sensitivity	1.26 V rms
Maximum Voltage Gain	35 dB
Input Clipping	10 V rms (+22 dBu)
Output Circuitry Class	AB+B
Distortion(SMPTE-IM)	Less than 0.02%
	ALL MODELS
Distortion(Typical) 20 Hz–20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power	Less than 0.01% THD Less than 0.01% THD
Frequency Response(typical)	20 Hz–20 kHz, ± 0.2 dB 8 Hz–50 kHz, +0/-3 dB
Damping Factor	Greater than 500 (1 kHz and below)
Input Impedance	6 kΩ unbalanced, 12 kΩ balanced
Cooling	Variable speed fan, rear to front airflow through tunnel heat sink
Connectors, each channel	Input: 3 position Euro-style detachable barrier block, channels 1, 2, 3, 4 DataPort: two HD-15 connectors—Ch 1+2, Ch 3+4 Output: Six-position barrier strip with monitor connections, Ch 1+2, Ch 3+4
Amplifier Protection	Full short circuit, open circuit, thermal, ultrasonic, & protection. Stable into reactive or mismatched loads.
Load Protection	On/off muting, DC-fault power supply protection
Indicators	PARALLEL INPUTS: Red LED BRIDGED: Yellow LED PWR-ON: Green LED	CLIP/PROT: Red LED (1 per channel) LEVEL-10 dB: Yellow LED (1 per channel) LEVEL-20 dB: Yellow LED (1 per channel) SIGNAL -35 dB: Green LED (1 per channel)
Controls	Controls Front: AC switch, four gain knobs Rear: Two DIP switch gangs—channels 1 and 2; channels 3 and 4: clip limiter on/off, LF filter on/off, LF filter freq select 33 Hz or 75 Hz for non-V models; 50 Hz or 75 Hz for V models; inputs parallel or stereo; bridge mode
Dimensions	19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces), 14" (35.6 cm) deep (from front mounting rails)
Weight	21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping
Power Requirements	100, 120, 230 V AC, 50–60 Hz

Related Product

Prev Next

WLL-TR-1P-II SoundTube front view quarter left

WLL-TR-1P-II SoundTube Tri-band Uncompressed Wireless WLL-TX1 Transmitter and WLL-RX1P Receiver System

Description WLL-TR-1P-II SoundTube Tri-band Uncompressed Wireless WLL-TX1 Transmitter and WLL-RX1P Receiver System The WLL-TX1 wireless transmitter unit is professionally designed capable of...

$564.00

QSC CX204V 4 channels, 200 watts/ch at 70V

Vendor: QSC

Related Product

Call for Price