Earthworks M30 Omni Measurement Microphone - 3Hz to 30kHz (mic clip & ADP1 adapter included)

Earthworks M30 Omni Measurement Microphone - 3Hz to 30kHz (mic clip & ADP1 adapter included)

The M30 designed by Earthworks is a cost effective measurement microphone intended for large and small room calibration. The extra wide frequency response of 9Hz to 27 kHz is flat throughout the whole spectrum and results in accurate room calibration through MLSSA, maart, SIMM and TEF based systems.

The small element yields an omnidirectional pattern leading in a wide pick up area at the front and sides of the microphone capsule.

Earthworks M30 Specs

• Transducer: Condenser
• Polar Pattern: Omnidirectional
• Frequency Response: +/- 1 dB, 9 Hz to 27 kHz
  +1 / -3 dB, 5 Hz to 30 kHz
• Dynamic Range (Typical): 72 dB
• Signal-to-Noise Ratio: 27 dB SPL Equivalent (A weighted)
• Maximum Input Sound Level:  150 dB SPL
• Power Requirements: +48 V Phantom, 10mA
• Output Impedance: 600 ohms between pin 2 and pin 3
• Output Connectors: XLR intended to drive a balanced transformerless input Pin 2+
• Low Frequency Roll-Off: No
• Dimensions: 9 x 0.860" (229 x 22 mm)(Length x Diameter)
• Weight: 0.5 lb (225 g)

Packaging Info

• Package Weight: 1.085 lb
• Box Dimensions (LxWxH): 13.1 x 4.95 x 2.85"