Pro Intercom BLAZON4 Signal Light Top-mounted round strobe. No annunciator.

Pro Intercom BLAZON4 Signal Light Top-mounted round strobe. No annunciator.

Strobe Beacon Light

Performance: Pro Intercom BLAZON4 is triggered by the same voltage which is also lighting the normal signal lamps in the intercom system. Anytime that any of the signal lamp button on any station in the same circuit is pressed, the Pro Intercom BLAZON4 will be activated. The xenon lamp is connected to the system permanently. Its circuitry is provided for sustaining the Pro Intercom BLAZON4 for 4 seconds after the time it is being triggered. The xenon lamp created with a flash rate of 2Hz, that provides 8 flashes on every cycle.

The Pro Intercom BLAZON4 is connected to the headset intercom system in the same manner as a belt pack. It is equipped with two 3-pin XLR connectors on the rear panel. By convention (to differentiate from microphone inputs) the female connector is designated as input. For looping onwards to the next station in the system, male connector is provided.  Even this connections be reversed it won't affect the operation.

The Pro Intercom BLAZON4 is powered by the intercom power supply and requires no batteries or other external power source. In its ready mode it draws only 21.1mA; with the strobe active, 120mA. When calculating power supply requirements, you may consider the Blazon/4 as the approximate equivalent of 3 or 4 belt packs.

Durability: The ribbed, extruded aluminum case; glass-filled nylon end bezels; internal support system for the PC board, and; best quality XLR-type connectors, all contribute to the Blazon/4's ability to withstand rough usage.