Community ENT-LF (Black) / ENT-LFW (White) ENTASYS Low Frequency Column

Community ENT-LF (Black) / ENT-LFW (White) ENTASYS Low Frequency Column

Community ENT-LF for Black and ENT-LFW for White, is professionally designed capable of offerring superior performance, high output and high power handling capability in architecturally appealing enclosures. The scalable design comes supporting configurations of loudspeakers from singles to floor-to-ceiling arrays of any length, that meets the acoustical design needs of nearly any application. The ENTASYS LF is made as a low frequency column in the same size enclosure as the ENTASYS FR, and is carefully designed for extending the low frequency pattern control and also minimizes the overall system costs at the same time.

ENTASYS is created as the most beneficial in medium to large highly reverberant spaces. As a modular true line source, an array of nearly any length is possible to be assembled. Longer arrays are minimizing the sound reflections, which reduces the reverberation and increases the speech intelligibility. The ENTASYS LF is made equally suited for use in indoor and outdoor direct exposure applications. A wide range of mounting brackets is available for fitting nearly every installation.

• Frequency Response: 200 Hz - 1.6 kHz
• Power Handling: 600W RMS, 1500W PGM
• Recommended Amplifier: 1200W to 1800W
• Sensitivity: 90 dB
• Max SPL (single unit): 116 dB
• Nominal Impedance: 12 Ohms
• Typical SPL at 100 ft (30 m): Dependent on LF configuration
• Crossover Frequency: 1.6 kHz Low-Pass
• Nominal Dispersion: Using the LF column(s) enhances vertical pattern control at lower frequencies
• Driver Components: LF - Six (6) 3.5" drivers with optimized spacing, allows extension of the narrow vertical beamwidth into the lower frequencies
• Baffle Form: Straight
• Input Connection:
• Top: (1) Banana (male)
• Bottom:
• (1) NL4 locking connector
• (2) Terminal Strip
• (1) Banana (female)
• Controls: None
• Supplied Accessories:
• (1) T-Bar mounting bracket
• (1) Input wiring cover
• (1) Top Connector Cover
• Required Accessories: Digital Signal Processor, 200 Hz High Pass Filter
• Optional Accessories:
• ENT-PB Pan Bracket Kit
• ENT-PT Pan-Tilt Bracket Kit
• ENT-FK Fly Kit
• ENT-CB Coupler Bracket
• ENT-750T 750W Autoformer
• Grille: Matching Metal Curved Grille
• Enclosure: Aluminum construction, molded nylon end caps
• Finish: Black
• Dimensions:
• Height: 44.5" (1129mm)
• Width: 5.5" (140mm)
• Depth: 7.36" (187mm)
• Weight: 24 lbs (10.9 kg)