Listen Technologies LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz)
Vendor: Listen Technologies
Available
Listen Technologies LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz)
Variants:
LR-5200-072 - 72 MHz
LR-5200-216 - 216 MHz
Listen Technologies’ LR-5200-072 / LR-5200-216 Advanced Intelligent DSP RF Receiver (72 MHz / 216 MHz) is offering assistive listening users an option for high-performance audio in a compact device that offers best-in-class pickup and reduced noise. The LR-5200-072 / LR-5200-216 also provides houses of worship, theaters, lecture halls, and other venues with an affordable and easy-to-manage solution when adding or expanding their assistive listening options. The LR-5200-072 / LR-5200-216 is an affordable and ecologically responsible option thanks to the integrated rechargeable battery technology, which lowers operating and ownership costs while providing longer usage. Each device has a micro-USB port that may be utilized for convenient and rapid battery charging as well as quick and easy firmware upgrades, setup, and programming using the free iDSP software.
The integrated neck loop and lanyard with DSP loop driver makes the LR-5200-072 / LR-5200-216 easy to wear and convenient for listeners with T-coil equipped hearing aids. Additionally, the OLED display built in to each receiver provides at-a-glance information including channel status, battery level, and more. From classrooms to conferences, businesses to banquet halls, and more, the LR-5200-072 / LR-5200-216 makes an outstanding choice for a comfortable, clear, and reliable personal listening receiver,
Audio
Frequency Response | 50 Hz - 15 kHz (±3 dB) |
System Distortion | < 2% total harmonic distortion (THD) at 80% deviation |
Output/s | Two (2) 3.5 mm (0.14 in.) connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm |
System Signal to Noise Ratio | SQ enabled 80 dB, SQ disabled 60 dB |
Controls
User Controls | Power, up/down volume, Listen button for end user channel selection |
Programming | Via software and USB port |
Set-up Controls | Press and hold up/down volume buttons for 5 seconds to enter channel adjust, use up/down to select channel |
Indicators
LEDs | Flashes when batteries are low or to indicate charging, solid when fully charged |
Display | Channel designation,battery level, unit number, charging status |
RF
Frequency Range | 72.025 - 75.950 MHz |
Number of Channels | 17 wide band, 40 narrow band |
Sensitivity | .6uV typical, 1 uV maximum for 12 dB sinad |
Frequency Accuracy | ± .005% stability 32 to 122 ºF (0 to 50 ºC) |
Squelch | Programmable in 20 steps, automatic on loss of RF signal |
Antenna Type | Uses ear phone/neck loop lanyard and short ear phone cable or standard earphone cable |
Power
Power Supply | Micro USB connector, 5 V, 500 mA |
Battery Type | Lithium Ion 3.7 Vdc, 1200 mAh |
Battery Life | 8 Hours of continuous use |
Battery Charging Time | Fully charged in 2.5 Hours |
Physical
Color | Black |
Unit Weight with Batteries | 2.40 oz. (68 g) |
Shipping Weight | 3.20 oz. (91 g) with 1.0 lbs. (454 g) minimum |
Dimensions (H x W x D) | 3.75 x 2.0 x 0.64 in. (9.6 x 5.0 x 1.7 cm) |
Unit Weight | 1.60 oz. (45 g) |
Dimensions with Belt Clip | 3.75 x 2.0 x 0.80 in. (9.6 x 5.0 x 2.1 cm) |