Earthworks M30 Omni Measurement Microphone - 3Hz to 30kHz (mic clip & ADP1 adapter included)

Vendor: Earthworks
Earthworks M30 Omni Measurement Microphone - 3Hz to 30kHz (mic clip & ADP1 adapter included) The M30 designed by Earthworks is a cost effective measurement microphone intended for large and small room calibration. The extra wide frequency response...
$699.00 $874.00
Title

Earthworks M30 Omni Measurement Microphone - 3Hz to 30kHz (mic clip & ADP1 adapter included)

The M30 designed by Earthworks is a cost effective measurement microphone intended for large and small room calibration. The extra wide frequency response of 9Hz to 27 kHz is flat throughout the whole spectrum and results in accurate room calibration through MLSSA, maart, SIMM and TEF based systems.

The small element yields an omnidirectional pattern leading in a wide pick up area at the front and sides of the microphone capsule.

  • The miniature element provides an accurate omnidirectional pattern with an even coherent response at the direct and off-axis sections of the microphone capsule.
  • The wide, linear frequency response accurately captures audio signal and reproduces the slightest nuance with great detail.
  • The uncolored, flat signal results in accurate room calibration for indoor and outdoor application.
  • Includes microphone clip and calibration adapter

Earthworks M30 Specs

  • Transducer: Condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: +/- 1 dB, 9 Hz to 27 kHz
    +1 / -3 dB, 5 Hz to 30 kHz
  • Dynamic Range (Typical): 72 dB
  • Signal-to-Noise Ratio: 27 dB SPL Equivalent (A weighted)
  • Maximum Input Sound Level:  150 dB SPL
  • Power Requirements: +48 V Phantom, 10mA
  • Output Impedance: 600 ohms between pin 2 and pin 3
  • Output Connectors: XLR intended to drive a balanced transformerless input Pin 2+
  • Low Frequency Roll-Off: No
  • Dimensions: 9 x 0.860" (229 x 22 mm)(Length x Diameter)
  • Weight: 0.5 lb (225 g)

Packaging Info

  • Package Weight: 1.085 lb
  • Box Dimensions (LxWxH): 13.1 x 4.95 x 2.85"