Earthworks M30BX Battery Operated M30 w/built-in preamp - 9Hz to 30kHz (mic clip & ADP2 adapter included)
The Microphone M30BX Powered with battery developed by Earthworks is a measurement microphone comes with an omni-directional polar pattern for on-site acoustical measurements like loudspeaker design sound system setup & room acoustics, quality control, troubleshooting, or other applications where a free-field measurement microphone is needed & a power source is unavailable.
The M30BX body opens for access to a replaceable battery which will power the unit for 300 hours of operation. The M30BX needs a 6V lithium battery (included) or four LR44 alkaline batteries. The battery is automatically powered On or Off when the XLR connection is inserted or removed, eliminating the need for a power switch and preserving battery life. Featuring a flat frequency response that extends from 9 Hz to 30 kHz, the M30BX microphone is equipped with a fast impulse response and linear phase response. The M30BX makes it suitable to be used with high-quality FFT-based real-time audio system measurement software like SMAART, Electroacoustics Toolbox, SIM, REW, FuzzMeasure, and others, as well as for use in PA system alignment and loudspeaker design.
Additionally, every M30BX Battery-Powered Measurement Microphone is individually hand-tuned and tested and includes a 1/2" calibrator adapter, an XLR to RCA adapter, and an MC3 microphone clip.
- Microphone body opens for replaceable battery access, with a battery life of 300 hours
- Works with RTA apps for iPad/iPhone with TRRS to XLR mic cable (sold separately)
- 9 Hz to 30 kHz flat frequency response
- Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Updated version of the SMAARTMIC previously offered by EAW
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response, and natural polar characteristics
- Used by SMAART, MLSSA, Spectrafoo, TEF, and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX, and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
FREE CHURCH DESIGNS
Call us 1-877-477-6543 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
