Panasonic AV-HS6000U2PS, 2ME Switcher System with Dual PS, M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies)

Vendor: Panasonic
Descriptions Panasonic AV-HS6000U2PS, 2ME Switcher System with Dual PS, M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) The Panasonic AV-HS6000U2PS configuration includes the main frame of the switcher, featuring...
$47,000.00
Title

Panasonic AV-HS6000U2PS, 2ME Switcher System with Dual PS, M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies)

The Panasonic AV-HS6000U2PS configuration includes the main frame of the switcher, featuring the input/output connectors and processing engine, and a 2 M/E control panel, both in a dual redundant power supply configuration. The main frame of the Panasonic AV-HS6000U2PS offers 32 HD-SDI inputs, two DVI-D inputs for incorporating computer sources and 16 output channels each mirrored on two SDI outputs. The main frame also supports video resolutions up to 1080p at 10-bit 4:2:2 in YUV color space, and up to 1080p 8-bit 4:4:4 in RGB color space. Also, it also accepts VESA resolutions up to 1600 x 1200 for a 4:3 aspect ratio output and 1920 x 1200 for a 16:10 output.

The Panasonic AV-HS6000U2PS control panel features two sets of bus selector buttons, crosspoint buttons, T-bars, a joystick, transition keys, display panel, and more. It also additionally supports the optional AV‑HS60C3G touchscreen menu panel, which allows quick menu operation as well as control of other functions via physical buttons and rotary encoders.

Panasonic AV-HS6000U2PS Main Features

  • Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supply)
  • Main Frame & 2 M/E Control Panel
  • Redundant Power Supply Configuration
  • 32 HD-SDI and 2 DVI-D Inputs
  • 16 Outputs Each Mirrored on 2 SDI Outs
  • Up to 1080p 10-Bit 4:2:2 / 8-Bit 4:4:4
  • Up to 1600x1200 4:3 / 1920x1200 16:10
  • Selector/Crosspoint/Transition Buttons
  • Downstream / Upstream Keyers
  • 4-Channel MultiViewer Function
  • T-Bars, Joystick, Display Panel
SDI Input Lines: 32
Connectors: 32 x BNC female
SDI channels 27, 28, 31, and 32 are equipped with up-converters
SDI channels 25 to 32 are equipped with color correctors

Signal Standards HD-SDI
SMPTE292M (BTA S-004) standard compliant
0.8 V (p-p) ±10% at 75 ohm
Automatic equalizer for runs more than 328' (100 m) -- when 1.5 Gbps/5C-FB cable is used

Signal Standards SD-SDI
SMPTE259M standard compliant
0.8 V (p-p) ±10% at 75 ohm
Automatic equalizer for runs more that 656' (200 m) -- when 5C-2V cable is used
DVI Input Lines: 2
Connectors: 2 x DVI-D
Supported Resolutions (Computer): XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical Frequency (Computer): 60 Hz Supported Video Formats: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p

Note:
Cable lengths up to 16.4' (5 m) are supported
A DVI-I cables are not supported
HDCP is not supported
SDI Output Lines: 16 -- two distributed outputs per line
Connectors: 32 x BNC female
Assignments: ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16

Signal Standards HD-SDI
SMPTE292M (BTA S-004) standard compliant
0.8 V (p-p) ±10% at 75 ohm

Signal Standards SD-SDI
SMPTE259M standard compliant
0.8 V (p-p) ±10% at 75 ohm
Video Formats SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF, 1080/25PsF
Signal Processing Y: PB: PR: 4:2:2, 10-bit
R:G:B: 4:4:4: 8-bit
Mix / Effect Buses 2 ME
Synchronous Terminal
Reference Input Connectors: 2 x BNC female -- input with loop-through

Supports same field frequencies as those of the system formats supported:
In Genlock Mode: Black burst or tri-level sync (with loop-through)

Note:
If the loop-through output is not used, 75 ohm termination is required
In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M compliant) or Tri-level Sync signals are supported
In the 1080/24PsF format, Tri-level sync signals supported
In internal sync mode black burst signal is output through both connectors
LTC Input Connector: BNC female
Impedance: 1 kohm
Level: 1 to 2 V (p-p)
Video Delay 1 Line (H): When the frame synchronizer is set to "Off" and the upconverter is set to "OFF"
1 Frame (H): When the frame syncronizer is set to "ON", or the upconverter is set to "ON"

Note:
When the signals have passed through PinP, DVE, MultiView, down-converter, or DVI-IN, a maximum delay of 1 frame is applied in each case
Control Terminal
LAN Terminal Connector: 1 x RJ-45
Compatible with 100Base-TX and AUTO-MDIX -- for IP control
Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
PANEL Terminal Connector: RJ-45
Compatible with 100Base-TX and AUTO-MDIX -- for Control Panel (AV-HS60C1/AV-HS60C2) connection
Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
Serial Interface Connectors: 4 x D-sub 9-pin female
Terminals 1 to 3: For master connection to control external devices
Terminal 4: For master/slave connection to control external devices
GPI In/Out Connectors: 3x D-sub 25-pin female

Terminal 1
GPI Input: 18 inputs, general-purpose, photocoupler sensing
Alarm Output: 1 output, open collector output (negative logic)

Terminal 2 and 3
GPI Output: 48 outputs, selectable general purpose or tally -- open collector output
General
Power Requirements 100 to 240 VAC at 50 or 60 Hz
Power Consumption 110 W
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature 32 to 104°F (0 to 40°C)
Operating Humidity 10 to 90% RH, no condensation
Storage Humidity 10 to 90% RH, no condensation
Dimensions 19 x 5.2 x 16.5" (482 x 132 x 418 mm)
Weight 29.7 lb (13.5 kg) -- excluding accessories

 

Panasonic AV-HS60C2P Control Panel For AV-HS6000 (Dual Redundant Power Supply) Specs

General
Power Supply 100 - 240 VAC, 50/60 Hz (supports dual redundant power supply)
Connections 1x RJ-45
1x DVI-D for optional Menu Panel only (cannot be used concurrently with a DVI-D monitor connected to the DVI-D terminal)
1x DVI-D for displaying menus to the DVI monitor (cannot be used concurrently with the Menu Panel terminal)
1x USB type A, female for DVI monitor menu operation
1x RS-422 control terminal, D-sub 9-pin female (for master connection for controlling external devices)
1x RS-232 control terminal, D-sub 9-pin female (for master/slave connection for controlling external devices)
8x GPI inputs D-sub 25-pin female
10x GPI outputs D-sub 25-pin female
1x Alarm output D-sub 25-pin female
Power Consumption 40 W
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature 32 to 104°F (0 to 40°C)
Operating Humidity 10 to 90% (no condensation)
Storage Humidity 10 to 90% (no condensation)
Dimensions 38.6 x 6 x 10.5" (98 x 15.3 x 26.7 cm)
Weight Approx. 31 lb (13.9 kg) (excluding accessories)