Panasonic AV-HS60U1P, 2ME Switcher Mainframe with Single PS, Main Frame w/ Single Power Supply for AV-HS6000 Switcher

Vendor: Panasonic
Descriptions Panasonic AV-HS60U1P, 2ME Switcher Mainframe with Single PS, Main Frame w/ Single Power Supply for AV-HS6000 Switcher The Panasonic AV-HS60U1P feature its Main Frame w/Single Power Supply for AV-HS6000 Switcher from Panasonic features...
$15,500.00
Title

Panasonic AV-HS60U1P, 2ME Switcher Mainframe with Single PS, Main Frame w/ Single Power Supply for AV-HS6000 Switcher

The Panasonic AV-HS60U1P feature its Main Frame w/Single Power Supply for AV-HS6000 Switcher from Panasonic features the input and output connectors and processing engine that drives the AV-HS6000 2 M/E switcher. The Panasonic AV-HS60U1P features 32 D-SDI inputs, along with two DVI-D (digital only) inputs for incorporating content from computer sources. The Panasonic AV-HS60U1P will support video resolutions up to 1080p at 10-bit, 4:2:2 in YUV color space, and up to 1080p 8-bit 4:4:4 in RGB color space. In addition, it will accept VESA computer resolutions up to 1600 x 1200 for 4:3 and 1920 x 1200 for 16:10.

The Panasonic AV-HS60U1P is designed to be operated using the AV-HS60C1P/AV-HS60C1E or RAV-HS60C2P/AV-HS60C2E control panel. In addition, software plug-ins allow operation over an IP network or using certain Panasonic and third-party RS-422 serial devices. In addition, the AV-HS60C3G Menu Panel is required to access and change settings locally at the switcher.

Also, the Panasonic AV-HS60U1P features 16 output channels, with each output channel mirrored on two SDI outputs. Not only can these outputs be used for an isolated, program, or aux feed, it is also possible to combine up to 16 ISO channels and send to one display using the MultiView function. Additional display arrangements are also possible, including a "squeeze mode" which reduces the image size to fit audio levels and other data around the outside. A total of 4 channels may be used in conjunction with the MultiView function.

The Panasonic AV-HS60U1P system features two mix and effects (M/E) buses with fades, transitions, and other effects possible. Additionally, the switcher features both upstream and downstream keyers (USK and DSK) for filling in black space, logo and graphic insertion, and compositing. Frequently used effects, setting, video clips, and still images can be save to the internal memory for later recall during a production.

Panasonic AV-HS60U1P Main Features

  • 32 x SDI and 2 x DVI-D Inputs
  • 16 x Independent Output Channels
  • 2 x Mirrored SDI per Output Channel
  • Downstream and Upstream Keyers
SDI Input Lines: 32
Connectors: 32 x BNC female
SDI channels 27, 28, 31, and 32 are equipped with up-converters
SDI channels 25 to 32 are equipped with color correctors

Signal Standards HD-SDI
SMPTE292M (BTA S-004) standard compliant
0.8 V (p-p) ±10% at 75 ohm
Automatic equalizer for runs more than 328' (100 m) -- when 1.5 Gbps/5C-FB cable is used

Signal Standards SD-SDI
SMPTE259M standard compliant
0.8 V (p-p) ±10% at 75 ohm
Automatic equalizer for runs more that 656' (200 m) -- when 5C-2V cable is used
DVI Input Lines: 2
Connectors: 2 x DVI-D
Supported Resolutions (Computer): XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical Frequency (Computer): 60 Hz Supported Video Formats: 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 720/59.94p, 720/50p

Note:
Cable lengths up to 16.4' (5 m) are supported
A DVI-I cables are not supported
HDCP is not supported
SDI Output Lines: 16 -- two distributed outputs per line
Connectors: 32 x BNC female
Assignments: ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2, DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to AUX16

Signal Standards HD-SDI
SMPTE292M (BTA S-004) standard compliant
0.8 V (p-p) ±10% at 75 ohm

Signal Standards SD-SDI
SMPTE259M standard compliant
0.8 V (p-p) ±10% at 75 ohm
Video Formats SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF, 1080/23.98PsF, 1080/25PsF
Signal Processing Y: PB: PR: 4:2:2, 10-bit
R:G:B: 4:4:4: 8-bit
Mix / Effect Buses 2 ME
Synchronous Terminal
Reference Input Connectors: 2 x BNC female -- input with loop-through

Supports same field frequencies as those of the system formats supported:
In Genlock Mode: Black burst or tri-level sync (with loop-through)

Note:
If the loop-through output is not used, 75 ohm termination is required
In the 1080/24PsF and 1080/23.98PsF formats, only Genlock mode supported In the 1080/23.98PsF format, black burst signals with 10 Field ID (SMPTE318M compliant) or Tri-level Sync signals are supported
In the 1080/24PsF format, Tri-level sync signals supported
In internal sync mode black burst signal is output through both connectors
LTC Input Connector: BNC female
Impedance: 1 kohm
Level: 1 to 2 V (p-p)
Video Delay 1 Line (H): When the frame synchronizer is set to "Off" and the upconverter is set to "OFF"
1 Frame (H): When the frame syncronizer is set to "ON", or the upconverter is set to "ON"

Note:
When the signals have passed through PinP, DVE, MultiView, down-converter, or DVI-IN, a maximum delay of 1 frame is applied in each case
Control Terminal
LAN Terminal Connector: 1 x RJ-45
Compatible with 100Base-TX and AUTO-MDIX -- for IP control
Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
PANEL Terminal Connector: RJ-45
Compatible with 100Base-TX and AUTO-MDIX -- for Control Panel (AV-HS60C1/AV-HS60C2) connection
Supported Cable: CAT5E or better, up to 328' (100m) -- STP (Shielded Twisted Pair) cable recommended
Serial Interface Connectors: 4 x D-sub 9-pin female
Terminals 1 to 3: For master connection to control external devices
Terminal 4: For master/slave connection to control external devices
GPI In/Out Connectors: 3x D-sub 25-pin female

Terminal 1
GPI Input: 18 inputs, general-purpose, photocoupler sensing
Alarm Output: 1 output, open collector output (negative logic)

Terminal 2 and 3
GPI Output: 48 outputs, selectable general purpose or tally -- open collector output
General
Power Requirements 100 to 240 VAC at 50 or 60 Hz
Power Consumption 110 W
Operating Temperature 32 to 104°F (0 to 40°C)
Storage Temperature 32 to 104°F (0 to 40°C)
Operating Humidity 10 to 90% RH, no condensation
Storage Humidity 10 to 90% RH, no condensation
Dimensions 19 x 5.2 x 16.5" (482 x 132 x 418 mm)
Weight 27.8 lb (12.6 kg) -- excluding accessories