RCF C3108-96 (90° x 60°) / C3108-126 (120° x 60°) Passive 8" 2-way Commercial Install Speaker

RCF C3108-96 (90° x 60°) / C3108-126 (120° x 60°) Passive 8" 2-way Commercial Install Speaker

The RCF C3108-96. or RCF C3108-126, is a professionally designed Two-Way Passive Speaker System made by RCF that comes featuring a Constant Matching Design technology intended for having an optimal transition between the high frequency horn polar pattern and the low frequency woofer directivity. The horn is possible to be rotated, that allows the loudspeaker to be installed either vertically or horizontally. The high-frequency transducer in this system is a carefully installed 1” compression driver that comes along with 1.5” voice coil for having a smooth, wide dispersion and comes featuring an 8” woofer with a 2” voice coil for low frequency signals.

The system comes including a high-level crossover network that comes featuring the LICC (Low Impedance Compensated Crossover) that is capable of offering delay reduction, reduced phase shift, and superior transient response. Dynamic high-frequency driver protection is accomplished along with the Active Mosfet Compression Driver Protection System (AMCDP) that complements the driver power curve.

The cabinet is constructed out of Baltic birch and comes equipped along with top and bottom multiple plates intended for either wall or suspended mounting that comes with chains. The steel front grille is protected along with a double layer polyurethane fabric. Connections are made through two Neutrik Speakon NL4 connectors (audio input and parallel link output). It is suitable for use in permanent installations such as main reinforcement in small spaces, high-level AV playback, zone delay and fill systems, or under balcony installations.

• Features an 8" high-output woofer and a 1" compression driver
• C3108-96 (90° x 60°) CMD (Constant Matching Design) constant directivity horn
• C3108-126 (120 x 60°) CMD (Constant Matching Design) constant directivity horn
• Rotatable horn for horizontal mounting
• Trapezoidal enclosure made of 12mm birch plywood
• HF driver with Active Mosfet Compression Driver Protection (AMCDP)
• Low Impedance Compensated Crossover (LICC)
• Rigging inserts: 6 x M8 (rear), 2 x M10 (lateral)
• Features multiple plates on top and bottom for either wall or suspended mounting with chains and includes installation points on its rear panel as well
• Easily rotatable front RCF logo