RCF C3110-96 (90° x 60°) / C3110-126 (120° x 60°) Passive 10" 2-way Commercial Install Speaker

RCF C3110-96 (90° x 60°) / C3110-126 (120° x 60°) Passive 10" 2-way Commercial Install Speaker

The RCF C3110-96 (90° x 60°), or C3110-126 (120° x 60°), is a professionally designed Two-Way Passive Speaker System made by RCF that comes featuring a Constant Matching Design technology intended for having an optimal transition between the high frequency horn polar pattern and the low frequency woofer directivity. The horn is possible to be rotated, which allows the loudspeaker to be installed either vertically or horizontally. The high-frequency transducer in this system is a carefully installed 1” compression driver that comes with 1.5” voice coil designed for having smooth, wide dispersion and comes featuring an 10” woofer that comes along with a 2” voice coil intended for low frequency signals.

The system comes including a high-level crossover network that is featuring the LICC (Low Impedance Compensated Crossover) that is capable of offering a delay reduction, reduced phase shift, and superior transient response. Dynamic high-frequency driver protection is accomplished that comes along with the Active Mosfet Compression Driver Protection System (AMCDP) that complements the driver power curve.

The cabinet is carefully created out of Baltic birch and comes equipped along with top and bottom multiple plates for use in either wall or suspended mounting along with chains. The steel front grille is protected that comes along with a double layer polyurethane fabric. Connections are made through two Neutrik Speakon NL4 connectors (audio input and parallel link output). It is made suitable for use in permanent installations such as main reinforcement in small spaces, high-level AV playback, zone delay and fill systems, or under balcony installations.

• Features an 10" high-output woofer and a 1" compression driver
• C3110-96 90° x 60° CMD (Constant Matching Design) constant directivity horn
• C3110-126 120° x 60° CMD (Constant Matching Design) constant directivity horn
• Rotatable horn for horizontal mounting
• Trapezoidal enclosure made of 15mm birch plywood
• HF driver with Active Mosfet Compression Driver Protection (AMCDP)
• Low Impedance Compensated Crossover (LICC)
• Rigging inserts: 8 x M8 (rear), 2 x M10 (lateral)
• Features multiple plates on top and bottom for either wall or suspended mounting with chains and includes installation points on its rear panel as well
• Easily rotatable front RCF logo

RCF C3110-96

RCF C3110-126