RCF SUB9006-AS Active Dual 18" Powered Subwoofer Speaker

RCF SUB9006-AS Active Dual 18" Powered Subwoofer Speaker

The RCF SUB9006-AS is professionally designed as one of the most powerful 2x18” subwoofers in the whole field of live sound. It is created featuring two high-power hyper-vented 18” neodymium woofers that comes along with 4.0” inside-outside voice coils, this cabinet is capable of delivering a serious amount of low frequencies. It is made powered by a 7200 W digital amplifier, the SUB 9006-AS is capable to perform in the most demanding situations. The enclosure housing of the SUB 9006-AS is matching of the RCF D-Line HDL50-A and HDL10-A array systems, which enables for building a stacked systems in a perfect combination.

• 7200 Watt Peak power - 3600 Watt RMS
• 142 dB max SPL
• 30 Hz - 400 Hz frequency response
• 2 x 18" Woofer
• DSP controlled Input section with selectable presets
• RDNet remote control
• Delay control
• Baltic birch cabinet

RCF RDNet
NETWORKED CONTROL AND MUCH MORE
RDNet is a professionally desinged robust management network and control platform intended for use in small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet is capable of providing a intuitive control and monitoring of every connected device/object in the RCF audio system. Each device comes with a DSP for addressing specific presets or modifications of parameters to single or groups of objects. A network user is possible to change the level, delay, EQ (linear phase FiR as well) and other settings, it includes the advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you are made capable to control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

TOP END ELECTRONICS
The amplifier comes integrating a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, polarity, RMS limits, timing, amplitude, and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back is capable of adjusting the input sensitivity, Low Cut, volume, Xover, delay, bypass and presets selection. The regulated power supply can guarantee the full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminium panel for extra protection during transportation.

HYPER VENTILATION SYSTEM
RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0" inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant.

STACKING HDL 50-A 4K OR HDL 10-A
The cabinet is made of high quality birch plywood with every layer glued by a special water-resistant adhesive weatherproofing the cabinet. The heavily braced internal structure of the cabinet survives long-term use and transportation. Two separate acoustic chambers for the woofers and a separate housing for the amplifier guarantee the best components efficiency and reliability. Dual Stacking: horizontal to fit the HDL 50-A 4K while the vertical fits HDL 10-A.

CABINET
The heavy-duty powder coated front grille integrates a central reinforcement bar and a special transparent-to-sound foam backing on the inside helps to further protect the transducers from dust. The subs are stackable and light-weight, for easy set-up and tear down. The SUB 9007-AS and SUB 9006-AS are equipped with 8 aluminum handles (4 per side) with ergonomic rubber handgrip. The transportation is fast with the detachable Kart kit: a dolly caster-board with rugged tour grade casters and rotating cam mechanism.

Acoustical specifications
FREQUENCY RESPONSE:
30 Hz ÷ 400 Hz

MAX SPL @ 1M:
142 dB
Transducers
WOOFER:
2 x 18'' neo, 4.0'' v.c

Input/Output section
INPUT SIGNAL:
bal/unbal

INPUT CONNECTORS:
XLR, RDNet Ethercon

OUTPUT CONNECTORS:
XLR, RDNet Ethercon

INPUT SENSITIVITY:
+4 dBu

Processor section
HI-PASS FREQUENCIES:
30Hz, 40Hz

LOW-PASS FREQUENCIES:
Variable from 50Hz to 400Hz

PROTECTIONS:
Thermal, RMS

LIMITER:
Fast Limiter

CONTROLS:
Gain, EQ, Preset, Phase switch, Output Delay Settings

RDNET:
Yes

Power section
TOTAL POWER:
7200 W Peak, 3600 W RMS

LOW FREQUENCIES:
7200 W Peak, 3600 W RMS

COOLING:
Convection/Forced

CONNECTIONS:
Powercon IN/OUT

Standard compliance
CE MARKING:
Yes

Physical specifications
CABINET/CASE MATERIAL:
Baltic birch plywood

HARDWARE:
2 x M20

HANDLES:
8 side

GRILLE:
Steel

COLOR:
Black

Size
HEIGHT:
558 mm / 21.97 inches

WIDTH:
1188 mm / 46.77 inches

DEPTH:
785 mm / 30.91 inches

WEIGHT:
86 kg / 189.6 lbs

Shipping informations
PACKAGE HEIGHT:
600 mm / 23.62 inches

PACKAGE WIDTH:
835 mm / 32.87 inches

PACKAGE DEPTH:
1230 mm / 48.43 inches

PACKAGE WEIGHT:
92 kg / 202.83 lbs