RCF TT1-A-II Active 10" 2-way Power Speaker 800 Watts

RCF TT1-A-II Active 10" 2-way Power Speaker 800 Watts

The RCF TT1-A-II is professionally designed capable of providing an extremely high-power output of 131 dB SPL max that comes along with low distortion in a vented two-way enclosure. The two-channel, class D power amplifier is yielding a total power output of 800 W RMS along with FiRPHASE 0° linear phase DSP processing, a complete set of protection circuitry and onboard RDNet intended for use in remote control and monitoring. The speaker comes featuring a neodymium 10” woofer and a 3,0” voice coil, titanium dome compression driver on a large, 90° x 60° constant directivity horn.

• 131 dB max SPL
• 800 W Class-D two-channel amplifier
• 90° x 60° constant directivity coverage
• FiRPHASE for 0° phase response
• Heavy-duty touring cabinet
• 32 bit - 96 kHz processing

RCF RDNet
NETWORKED CONTROL AND MUCH MORE
RDNet is a professionally designed robust management network and control platform intended for use in small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet is capable of providing an intuitive control and monitoring of every connected device/object in the RCF audio system. Each device comes along with DSP for addressing the specific presets or modifications of parameters to single or groups of objects. A network user is possible to change level, delay, EQ (linear phase FiR as well) and other settings, that includes advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you are made capable to control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.

STATE OF THE ART CLASS-D AMPLIFIERS
Two-channel Class-D amplifier that comes along with 800W total power output for an exemplary performance operating along with high efficiency into a lightweight solution. TT+ amplifiers are capable of delivering an ultra-fast attack, realistic transient response, and impressive audio quality.

ENGINEERED FOR MAXIMUM RELIABILITY
The amplifier housing is tightly fitted and sealed to the rear of the cabinet. A recessed and protected panel houses the connections for power, signal and control.

INPUT BOARD
The analog input board is fully featured offering XLR input and output link, preset selections, and a pre-loaded equalization bypass switch. EtherCON input and output connect the system in a daisy chain topology for RDNet networked management.

REAR PANEL
The rear panel features a simple rotary encoder with a push switch that controls all speaker functions. A bright display helps the system setting. The only switch on the panel sets local or remote control. A simple command from RDNet totally disables the input panel.

HIGH-END PROCESSING
The amplifier is incorporating a low noise 96 kHz, 32-bit floating-point DSP circuitry for computing FiRPHASE, soft clipping limiters, RMS limiters, polarity, amplitude, timing, and equalization. All the control settings, monitoring of each component and other advanced features are integrated in the RDNet Networked Management software.

DURABLE AND STURDY
The cabinets are made featuring a recessed die-cast aluminium side handles powder coated along with rubber hand-grip, designed capable of facilitating transport positioning and loading operations. A bottom pole socket allows the use of the speaker as a point source speaker on a stand or subwoofer pole. A variety of rigging options is available, between six Flying Tracks eyelet mounting rail on the upper and lower sides and four lateral Quick-Fit rigging points.

WEATHERPROOF CABINET
The speaker cabinet is made of high-quality Baltic birch plywood with a special adhesive to glue every layer; this makes the cabinet completely water-resistant even before the special polyurea paint, applied to create a very thick full coating of the cabinet, making the speaker highly resistant to scratches, bumps, sun, and extreme weather conditions.

HEAVILY BRACED INTERNAL STRUCTURE
The internal structure is heavily braced to survive long term use and transportation. All the parts are assembled on metal inserts with metric screws. The amplifier is housed in a separate chamber from the transducers to offer the best efficiency and reliability.

NEW PERSPECTIVE ON LINEARITY
RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener.

The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.

Acoustical specifications
FREQUENCY RESPONSE:
55 Hz ÷ 20000 Hz

MAX SPL @ 1M:
131 dB

HORIZONTAL COVERAGE ANGLE:
90°

VERTICAL COVERAGE ANGLE:
60°
Transducers
COMPRESSION DRIVER:
1 x 1.4'' neo, 3.0'' v.c

WOOFER:
10'' neo, 3.0'' v.c

Input/Output section
INPUT SIGNAL:
bal/unbal

INPUT CONNECTORS:
XLR

OUTPUT CONNECTORS:
XLR

INPUT SENSITIVITY:
+4 dBu

Processor section
CROSSOVER FREQUENCIES:
900 Hz

PROTECTIONS:
Thermal, RMS

LIMITER:
Soft Limiter

CONTROLS:
Gain reduction, RDNet local setup/bypass, time delay, Presets (linear, close, far listening, High - Pass), RDNet on board

RDNET:
Yes

Power section
TOTAL POWER:
1600 W Peak, 800 W RMS

HIGH FREQUENCIES:
500 W Peak, 250 W RMS

LOW FREQUENCIES:
1100 W Peak, 550 W RMS

COOLING:
Convection

CONNECTIONS:
Powercon IN/OUT

Standard compliance
CE MARKING:
Yes

Physical specifications
CABINET/CASE MATERIAL:
Baltic birch plywood

HARDWARE:
Installation/Rental fittings

HANDLES:
2 side

POLE MOUNT/CAP:
Yes

GRILLE:
Steel

COLOR:
Black

Size
HEIGHT:
566 mm / 22.28 inches

WIDTH:
333 mm / 13.11 inches

DEPTH:
370 mm / 14.57 inches

WEIGHT:
25.4 kg / 56 lbs

Shipping informations
PACKAGE HEIGHT:
690 mm / 27.17 inches

PACKAGE WIDTH:
480 mm / 18.9 inches

PACKAGE DEPTH:
430 mm / 16.93 inches

PACKAGE WEIGHT:
28 kg / 61.73 lbs