Community ENT220B (Black) / ENT220W (White) ENTASYS 200 Column, 2-Way 20 LF Drivers

Vendor: Community
Community ENT220B (Black) / ENT220W (White) ENTASYS 200 Column, 2-Way 20 LF Drivers The Community ENT220B for Black and ENT220W for White, is professionally designed as an all-weather, column line array loudspeaker that's made housed...
$1,900.00
Color
Black
White

Community ENT220B (Black) / ENT220W (White) ENTASYS 200 Column, 2-Way 20 LF Drivers

The Community ENT220B for Black and ENT220W for White, is professionally designed as an all-weather, column line array loudspeaker that's made housed in an attractive, heavy duty extruded PVC enclosure. The largest member of the ENTASYS 200 family, the ENT220 is capable of providing a exceptional directional control in the vertical axis for taming an extremely difficult acoustic environments. With enough power for covering an medium and large venues, a system of well-placed ENT220 columns provides intelligibility and superb musical reproduction, while barely being visible at the same time. Noisy environments, excessive reverberation, and other suboptimal acoustical conditions are handled effortlessly by the ENT220. Houses of worship, music venues and corporate AV presentations will benefit from the high performance and versatility of the ENT220.

At the top of the line is the ENT220 comes featuring twenty LF drivers for enhancing a low frequency pattern control, output and impact. The ENT220 LF extension is made equal to many 12-inch loudspeakers while its output is equal or greater than most 15-inch 2-way box loudspeakers at the same time. Passive crossovers comes along with unique dynamic protection circuitry that are providing a flat frequency responses while guarding against abusive conditions without harming sonic quality at the same time.

Features

  • Advanced passive crossover technology
  • Dynamic protection circuitry
  • Compact Ribbon Emulator high frequency technology for narrow, well-behaved vertical directivity control
  • All-weather construction for indoor/outdoor usage
  • Selectable low impedance or 70V/100V operation
  • Simple installation using the included pan-tilt mounting bracket
  • Tightly controlled vertical dispersion reduces harmful room reflections
  • Wide horizontal dispersion means fewer units cover a given area
  • Clean, clear and powerful sonic output without the cost of bi-amplification
  • Available in standard black or white finishes, may also be painted to match room décor
  • Loudspeaker Type: Two-way, column array loudspeaker, 8 Ohm or 70V/100V operation
  • Operating Range: 80 Hz - 22 kHz (-10 dB)
  • Frequency Response: 130 Hz to 20 kHz (-3 dB)
  • Max Input Ratings (8 Ohm): 500W continuous, 1250W program, 63 volts RMS, 126 volts momentary peak
  • Autoformer Taps:
    • 70V: 120W, 60W, 30W, 15W, 7.5W
    • 100V: 120W, 60W, 30W, 15W
  • Sensitivity (1W/1m): 97dB (130 Hz - 20 kHz) full space
  • Maximum Output: 124 dB SPL / 130 dB SPL (peak)
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 5.6 Ohms @ 320 Hz
  • Vertical Coverage: 15° (2 kHz - 16 kHz +/- 15°) @ 13m
  • Horizontal Coverage: 140° average (1 kHz - 10 kHz +/- 20°)
  • Crossover Frequency: 5000 Hz
  • Recommended Signal Processing: 80 Hz, 24 dB/Oct high pass filter
  • Drivers:
    • LF: (20) 80mm long excursion mylar drivers
    • HF: (4) 3-element Compact Ribbon Emulators
  • Driver Protection: Dynamic protection circuitry
  • Input Connection: NL4 Speakon-type connector for low impedance operation; and 8-position terminal strip for low impedance or constant voltage operation
  • Controls: None
  • Enclosure: Extruded, high gloss paintable PVC
  • Finish: Black or white
  • Grille: Dual-layer powder coated steel, black or white finish
  • Safety Features: Built-in safety eyebolt
  • Environmental: Outdoor Direct Exposure Certified IP54W per IEC529 for UV, moisture and salt spray
  • Required Accessories: High pass filter
  • Supplied Accessories: Pan-tilt bracket accommodating zero to 9° down-tilt and +/- 55° panning; and ABS plastic rain cover with integrated cable inlet and 1" (25.4mm) knockout for conduit ingress
  • Optional Accessories:
    • E200-UMK universal mounting kit
    • E200-SAK stand adapter kit
  • Dimensions:
    • Height: 64.6" (1643 mm)
    • Width: 4.62" (117 mm)
    • Depth: 7.47" (189 mm)
  • Weight (without bracket): 41 lbs (18.6 kg)