Martin Audio CDD-LIVE8, Self-powered, 2-way system with an 8 inch Driver Black & White

Vendor: Martin Audio
Martin Audio CDD-LIVE8, Self-powered, 2-way system with an 8 inch Driver Black & White Martin Audio CDD-LIVE8 has a wide coverage close-up, the Coaxial Differential Dispersion technology employed in the Martin Audio CDD-LIVE 8 delivers more...
$1,950.00
Color
Black
White

Martin Audio CDD-LIVE8, Self-powered, 2-way system with an 8 inch Driver Black & White

Martin Audio CDD-LIVE8 has a wide coverage close-up, the Coaxial Differential Dispersion technology employed in the Martin Audio CDD-LIVE 8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns, and its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. A self-powered system, the Martin Audio CDD-LIVE 8 incorporates a two-channel Class D amplifier, DSP, and Dante™ digital audio networking — simplifying set-up, enhancing control, and eliminating amplifier racks. The onboard amplifier delivers 1000W LF + 300W HF peak output to the drivers, and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain, and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software.

Martin Audio CDD-LIVE8 had a simple set-up, ‘plug-and-play’ presets — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. As an alternative to its analog inputs, the Martin Audio CDD- LIVE 8 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run. The Martin Audio Martin Audio CDD-LIVE 8 is incredibly versatile. Its multi-angle enclosure can be used in either horizontal or vertical orientation, with the rotation of the driver easily accomplished by removing the screw-free, protective grille. The tour-grade enclosure is constructed from multi-laminate plywood and finished in a hard-wearing polyurea coating. Integral fittings include a top-hat for pole mounting and multiple M8 inserts for attachment to a wall-bracket, yoke, or universal bracket with a wide range of up and down tilt angles.

 Martin Audio CDD-LIVE8 Main Key Features 

  • Ultra-Compact, self-powered two-way system
  • Coaxial Differential Dispersion™ technology
  • Onboard Class D amplification and DSP
  • Dante™ Digital Audio networking
  • Global mains operation with Power Factor Correction
  • User-rotatable CDD™ driver
  • Vertical and horizontal mounting options
  • Tour-grade, multi-angle plywood enclosure
  • IP24 rating option with rain cowl
  • Comprehensive mounting accessories
ACOUSTICS
TYPE  Ultra-Compact, Coaxial Differential Dispersion powered two-way system
FREQUENCY
RESPONSE (1)
 70Hz – 20kHz ±3dB, -10dB @ 50Hz
DRIVER  LF: 8” (200mm)/2” (50mm) voice coil, long excursion, shared ferrite   motor system with HF HF: 1” (25mm) exit/1.4” (38mm) voice coil,   polyimide dome compression driver
INPUT SENSITIVITY  -26dBu for 100dB SPL
MAXIMUM SPL (2)  117dB continuous / 123dB peak
DISPERSION  110˚-80˚ horizontal, 60˚ vertical (user-rotatable)
CROSSOVER  2.3kHz Active LR8 Balance presets for pole mount/ pole mount with sub/ stage monitor
MODULE AUDIO INPUT
CONNECTORS  Female XLR input, male XLR link output, Dante Audio Neutrik®   Ethercon
ANALOGUE INPUT IMPEDANCE  20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL  24.6 Vpp (+21dBu), over-voltage protected
INTERNAL PROCESSING  Multi-channel DSP, programmable via TCP/IP using VU-Net software
 PEQ/shelving filters
 Up to 48dB/Oct HPF
 Low latency HF FIR filters
 Up to 200ms input delay
 Pre-set selection via a rear panel switch
NETWORK
CONNECTORS  2x Neutrik ® Ethercon RJ45
PROTOCOL  TCP/IP and UDP/IP
AMPLIFIER
TYPE  2 channel switch-mode, class D
PEAK OUTPUT POWER  1300W total 1000W LF, 300W HF
AVERAGE EFFICIENCY  89%
COOLING  External convection cooled, with an internal fan
MAXIMUM AMBIENT TEMPERATURE  40°C (104°F) for full output
POWER SUPPLY
TYPE  Switch mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE  85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR  > 0.98
NOMINAL POWER CONSUMPTION  85W
MAINS CONNECTOR  Neutrik® Powercon True1
MECHANICAL
ENCLOSURE  Extensively braced multi-laminate plywood.
FINISH  Textured black PU coating.
PROTECTIVE GRILLE  HEX perforated mild steel with protective zinc plating and black
 powder coat finish. Backed with the black grille cloth
FITTINGS  Top hat for pole mounting
 15 x M8 mounting points
 Single pocket handle
 Optional weather protection cowl
IP RATING  IP24 factory option available
DIMENSIONS  (W) 258mm x (H) 428mm x (D) 254mm (W) 10.16in x (H) 16.85in x (D) 10.00in
WEIGHT  14kg (30.8lbs) excluding Transit cover
ACCESSORIES  Transit Cover Optional wall, yoke, and universal brackets