Radial ProMS2 Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output

Vendor: Radial
Description Radial ProMS2 Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output Passive 2-way Microphone Splitter The Radial ProMS2 is a balanced mic-level splitter that is professionally designed capable of sending...
$149.99 $225.00
Title

Radial ProMS2 Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output

Passive 2-way Microphone Splitter

The Radial ProMS2 is a balanced mic-level splitter that is professionally designed capable of sending a signal to multiple destinations all on the same time on stage, with one transformer-isolated output and two direct outputs.

Portable mic splitting for stage use

The Radial ProMS2 is a mic splitter that is professionally designed capable of splitting a single source to multiple destinations all on the same time with no signal degradation or noise. A high quality Eclipse transformer that is equipped in side is intended to provide galvanic isolation for the elimination of the hum and buzz caused by ground loops, and to deliver a wide frequency response and low distortion all at the same time. Ground lifts on the outputs are in there for helping in a much further noise reduction, while and input pad is allowing the line-level sources to be connected as well. The Radial ProMS2 can be rack mounted for installation and touring purposes, with up to eight fitting in the Radial J-Rak.

Features

  • Send one microphone signal to three destinations simultaneously
  • Eclipse transformer for clean & transparent audio
  • Eliminates hum and buzz caused by ground loops
  • Single isolated output provides optimal noise rejection
Specifications
Audio circuit type: Passive
Transformer: Eclipse ET-MS10
Frequency response: 20Hz ~ 20KHz (+0dB -1dB)
Dynamic range: >140dB
Gain: -0.5dB
Total harmonic distortion: 0.001%
Intermodulation Distortion: 0.003%
Phase Deviation: 1° @ 20Hz
Input Impedance: 2.5K Ohms, unbalanced
Output Impedance: 140K Ohms, balanced
Common Mode Rejection Ratio: -115dB at 60Hz
Noise: -140dB
Maximum Input: +26dBu
Features
Input pad
Input Connectors: XLR-F
Output Connectors: XLR-M
General
Construction: 14-gauge steel chassis & outer shell
Size (L x W x D): 5.0" x x
Weight: 1.55lb (0.7kg)
Shipping weight: 1.92lb (0.87kg)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable