Radial SGI (Set) Studio Guitar Interface, TX & RX, extends cable to 100 meters (300') without loss

Vendor: Radial
Description Radial SGI (Set) Studio Guitar Interface, TX & RX, extends cable to 100 meters (300') without loss Studio Guitar Interface System The Radial SGI (Set) is a high performance line driver system designed for guitars...
$329.99 $450.00
Title

Radial SGI (Set) Studio Guitar Interface, TX & RX, extends cable to 100 meters (300') without loss

Studio Guitar Interface System

The Radial SGI (Set) is a high performance line driver system designed for guitars capable of taking an unbalanced instrument signal and is allowing the users to drive it as far as 100 meters (300ft) without noise.

Looking at the SGI specifications is both worthwhile yet deceiving. On one hand, by looking at specs such as signal handling or noise will determine the quality of the interface. On the other hand, evaluating application specific devices like the SGI needs to be done by considering the source. A guitar for example is tending to be a mid range device with a relatively low output. Ultimately… it comes down to how it actually sounds. And the SGI sounds great!

Take your tone further

The SGI is sending guitar signals across long distances with no signal loss or noise, and retaining the original tone of the instrument at the same time. In the studio, it is allowing the guitarist to sit in the control room and connect to a distant guitar amp. On stage, the SGI can be used to play the guitar amp with the use off-stage isolation cabinets or it can be used to manage guitar signals to and from wireless systems, pedalboards and amplifiers. The SGI is consisting of two boxes: the SGI-TX transmitter and the SGI-RX receiver. The connection between the TX and RX is made with the use of a standard balanced XLR microphone cable. To use, you simply plug your guitar into the SGI-TX input and connect your amp from the SGI-RX output and you are set to go. The SGI does all of the balancing, buffering and impedance matching for you.

Features

  • Balanced line driver for guitar and bass
  • Send signal over 100 meters (300ft) without loss
  • 100% discrete class-A circuit with Drag control
  • Delivers natural tone to off-stage amplifiers
Specifications
Audio circuit type: Active 100% discrete class-A with transformer isolation
Frequency response: 20Hz ~ 18kHz (-2dB)
Dynamic range: 112dB
Total harmonic distortion: 0.005% @ 1k
Intermodulation Distortion: 0.04% @ 1k
Input Impedance: Variable from 10k Ohms ~ 1 megaOhm
Output Impedance: 4.5k Ohms (¼" unbalanced)
Noise: -102dBu
Maximum Input: +10dBu
Features
Ground lift, Drag Control
Input Connectors: TX: 1/4" | RX: XLR
Output Connectors: TX: XLR | RX: 1/4"
General
Construction: 14-gauge steel chassis & outer shell
Size (L x W x D): Size: 2.75" x 4.25" x 1.75" (70 x 108 x 44mm)
Weight: 3lbs. (1.36kg)
Shipping size (L x W x D): 5" x 2.75" x 10.75" (127 x 70 x 273mm)
Shipping weight: 3.2lbs (1.45kg)
Power: +15VDC/400mA adapter included
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable