Sonifex RB-UL2 Dual Stereo Unbalanced to Balanced Converter

Vendor: Sonifex
Sonifex RB-UL2 Dual Stereo Unbalanced to Balanced Converter A dual stereo unit called the RB-UL2 connects an unbalanced home or semi-professional equipment to balanced professional line levels. The rear panel houses all of...
$501.00
Title

Sonifex RB-UL2 Dual Stereo Unbalanced to Balanced Converter

A dual stereo unit called the RB-UL2 connects an unbalanced home or semi-professional equipment to balanced professional line levels. The rear panel houses all of the connectors. Four balanced XLR-3 outputs with an output impedance of 10kΩ are connected to four RCA unbalanced inputs with an impedance of the same less than 50Ω. You can feed both balanced and unbalanced equipment by utilizing the pre-set potentiometers that are accessible through the back panel to individually adjust the output gain for the left and right channels.

Audio Specification

Maximum Input Level: +28dBu
Input Impedance: >10kΩ
Maximum Output Level: +28dBu
Output Impedance: <50Ω
Distortion: 0.01% THD @ 1kHz, ref +8dBu output
Noise: -100dB, unity gain, ref +8dBu output
Frequency Response: 20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Gain Range: Balanced output : -15dBu to +15dBu, ref -15dBu into unbalanced RCA input
   

Connections

Inputs: 4 x RCA phono (Unbalanced)
Outputs: 4 x XLR 3 pin male (Balanced)
Mains Input: Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating: Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)
   

Equipment Type

RB-UL2: Dual stereo unbalanced to balanced converter
   

Physical Specification

Dimensions (Raw): 28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
11” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed): 36cm (W) x 20.5cm (D) x 6cm (H)
14.2” (W) x 8” (D) x 2.4” (H)
Weight: Nett: 1.05kg Gross: 1.5kg
Nett: 2.3lbs  Gross: 3.3lbs