Radial ProMS2 Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output
Vendor: Radial
Available
Radial ProMS2 Mic splitter, passive, 1 input, 2 direct outs & 1 Eclipse isolated output
Passive 2-way Microphone Splitter
The Radial ProMS2 is a balanced mic-level splitter that is professionally designed capable of sending a signal to multiple destinations all on the same time on stage, with one transformer-isolated output and two direct outputs.
Portable mic splitting for stage use
The Radial ProMS2 is a mic splitter that is professionally designed capable of splitting a single source to multiple destinations all on the same time with no signal degradation or noise. A high quality Eclipse transformer that is equipped in side is intended to provide galvanic isolation for the elimination of the hum and buzz caused by ground loops, and to deliver a wide frequency response and low distortion all at the same time. Ground lifts on the outputs are in there for helping in a much further noise reduction, while and input pad is allowing the line-level sources to be connected as well. The Radial ProMS2 can be rack mounted for installation and touring purposes, with up to eight fitting in the Radial J-Rak.
Features
- Send one microphone signal to three destinations simultaneously
- Eclipse transformer for clean & transparent audio
- Eliminates hum and buzz caused by ground loops
- Single isolated output provides optimal noise rejection
| Specifications | ||
|---|---|---|
| Audio circuit type: | Passive | |
| Transformer: | Eclipse ET-MS10 | |
| Frequency response: | 20Hz ~ 20KHz (+0dB -1dB) | |
| Dynamic range: | >140dB | |
| Gain: | -0.5dB | |
| Total harmonic distortion: | 0.001% | |
| Intermodulation Distortion: | 0.003% | |
| Phase Deviation: | 1° @ 20Hz | |
| Input Impedance: | 2.5K Ohms, unbalanced | |
| Output Impedance: | 140K Ohms, balanced | |
| Common Mode Rejection Ratio: | -115dB at 60Hz | |
| Noise: | -140dB | |
| Maximum Input: | +26dBu | |
| Features | ||
| Input pad | ||
| Input Connectors: | XLR-F | |
| Output Connectors: | XLR-M | |
| General | ||
| Construction: | 14-gauge steel chassis & outer shell | |
| Size (L x W x D): | 5.0" x x | |
| Weight: | 1.55lb (0.7kg) | |
| Shipping weight: | 1.92lb (0.87kg) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |
USD
EUR
AUD
GBP
JPY