Radial ProRMP Passive Reamper with custom transformer and level control
Vendor: Radial
Available
Radial ProRMP Passive Reamper with custom transformer and level control
Studio Reamper
The has been know as the 'secret weapon' for year and for countless recordings by the biggest names in the business! A little number realize that engineers in recording industry not only reamp guitars, but often Reamp drums, bass, keyboards and even voice as a means of bringing a creative new tones and sonic signatures to their music.
The Radial ProRMP Reamp is a transformer coupled passive device that is professionally designed for taking a balanced line level signal and convert it so that it is able to drive the high input impedance of a guitar amplifier. The Radial ProRMP Reamp as a passive device, it doesn't amplify the signal in any way. Critical to the performance is the low distortion and of course the frequency response. The Radial ProRMP is very ideal to use for Reamping and balanced output warming of a wireless system.
Reamping for every studio
The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound. Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!
Features
- Play pre-recorded tracks through amps and pedals
- On board level control for fine tuning amp level
- Transformer isolated to eliminate buzz and hum
- Opens the door to creative new tones and textures
Specifications | ||
---|---|---|
Audio circuit type: | Passive, transformer isolated | |
Frequency response: | 20Hz ~ 20KHz (+0/-1dB) | |
Dynamic range: | >137dB | |
Gain: | >-10dB | |
Total harmonic distortion: | 0.003% | |
Phase Deviation: | 0.3° @ 100Hz; 5° @ 20Hz | |
Input Impedance: | 600 Ohms | |
Output Impedance: | 600 Ohms, balanced | |
Common Mode Rejection Ratio: | 100dB @ 60Hz (unbalanced source) | |
Equivalent Input Noise: | >-98dBu Noise plus gain | |
Noise: | -111dBu | |
Maximum Input: | >+26dBu | |
Features | ||
Input pad, 180° polarity reverse, Ground lift | ||
Input Connectors: | XLR | |
Output Connectors: | 1/4" | |
General | ||
Construction: | 14 gauge steel chassis and outer shell | |
Size (L x W x D): | 3.3" x 5.0" x 2" (84 x 127 x 48mm) | |
Weight: | 1.55 lbs (720 g) | |
Power: | Passive, no power required | |
Conditions: | For use in dry locations only between 5°C and 40°C | |
Warranty: | Radial 3-year, transferable |