Marshall electronics V-LCD171MD-3G-DT 17.3" DT 3G monitor with Waveform, speakers, includes 3G module

Marshall electronics V-LCD171MD-3G-DT 17.3" DT 3G monitor with Waveform, speakers, includes 3G module

The 17.3" Full HD Desktop Mount Monitor and a pre-installed MD-3GE 3G-SDI Input Module are both included in the V-LCD171MD-DT 17.3" Full HD Desktop mount Monitor with 3G-SDI Input. The 17.3" monitor has a number of built-in features, including speakers, programmable function buttons, three-color tally lights, waveform and audio bar overlays, tilting mount design for comfortable viewing, and 400 cd/m² output with Full HD resolution. Its 600:1 contrast ratio highlights the monitor's ability to handle images in a variety of lighting situations. The Marshall Electronics 3G-SDI Input Module with Loop-Out attaches to the back of included monitor to equip it with a 3G/HD/SD-SDI input. Linked to the input is a 3G/HD/SD-SDI loop-out that can be used to output the camera signal to an SDI monitor up to 300' away.

Marshall Electronics 17.3" Full HD Desktop Monitor

The Marshall Electronics 17.3" Desktop Monitor boasts a number of built-in features, including speakers, programmable function buttons, a tilting mount design for comfortable viewing, and built-in waveform and audio bar overlays. It also supports Full HD resolution and outputs 400 cd/m². This monitor's 600:1 contrast ratio demonstrates its ability to handle images in a variety of lighting situations.

DSLR Ratio Adjustment

With Marshall's DSLR Ratio Adjustment tool, you may get rid of black pillar bars by scaling any video that doesn't fit the monitor's screen. On some Canon DSLRs, this feature is available when the display is connected via HDMI and in record mode. The settings that you can select from are Normal, 3:2, 16:9, and Full Screen. For quick and simple access, the DSLR Ratio Adjustment feature can be assigned to one of the four buttons on the front panel.

Waveform Display and Studio Audio Bar

Stereo audio bars and a waveform display are also integrated into the V-LCD71MD. These can be shown in any one of the monitor's four corners, either independently or in combination. Either the optional 3G-SDI input (16 channels) or the HDMI input (8 channels) are used to de-embedded the stereo audio. The headphone output and the display can both be set to any pair of the available channels.

Clip Guide

The Zebra function (Clip Guide) is used to visually filter data on the screen that is under a lower threshold or over an upper threshold. Data on either side of the filters can be displayed with a custom color. The Zebra function can also be inverted to filter the area between the Upper and Lower Threshold. The color selected for the lower threshold acts as the color for all inverted Zebra data.

False Color Filter

The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.

Peaking Filter

The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. When the camera operator adjusts (or "racks") the focus control (on the camera lens), different parts of the image will have these colored highlights. This indicates that this portion of the image is sharp or in focus. Final focus is achieved by racking the camera lens focus control back and forth until the desired portion of the image has the colored highlights. The original version of the peaking filter removed the color from the image leaving a black and white picture with Red highlights. This version of Peak Filter not only keeps the original color but adds a choice of four colors, red, green, yellow, and pink to choose from for the highlights as well as adjustable sensitivity for even finer control of focus.

Custom Pixel-to-Pixel Panning

To select a Custom Pixel-to-Pixel zone, you need to enter the Adjust function. The outer square represents the entire image and the inner grey box represents your current pixel-to-pixel selection. You can use the color knob to move your selection left and right or you can enable the input crop function to select the area of active video that you would like shown on the image display. To lock in your selection, you need to press the select button or the ROTOMENU knob.

User-Definable Function Buttons

Four user-definable function buttons on the front-panel allow quick access to numerous settings and features including focus-assist, false color filter, aspect ratio, screen markers, monochrome mode, color temperature, delay mode, and more.

Adjustable Screen Markers

A variety of screen markers in 4:3, 16:9, and full screen modes allow accurate monitoring of the different aspect ratios used in broadcast environments. User Markers allow for custom aspect ratio, cropping framing, and variable width lines.

Stereo Headphone Output

Eight channels of audio from the HDMI input or 16 channels of audio from the HD-SDI input (SDI card available separately) are available for monitoring. The headphones can monitor any pair from the available channels.

Six Custom Configuration Presets

Six User Setting Presets allow the user to save six system configuration files for later recall when needed. These configuration files will save 38 different parameters that can be adjusted by the user.

FEATURES

• Loss of input curtain
• Auto CSC for HDMI input
• Self-sensing
• Can be re-clocked
• Input status display for audio