Voice Technologies VT0030 VT500 Omni Lavalier Microphone w/ Lemo for Sennheiser White

Vendor: Voice Technologies
Description Voice Technologies VT0030 VT500 Omni Lavalier Microphone w/ Lemo for Sennheiser White The white Voice Technologies VT0030 is a professionally designed VT500 (LEMO 3-Pin Connector) is made as a durable omnidirectional lavalier...
$361.00
Title

Voice Technologies VT0030 VT500 Omni Lavalier Microphone w/ Lemo for Sennheiser White

The white Voice Technologies VT0030 is a professionally designed VT500 (LEMO 3-Pin Connector) is made as a durable omnidirectional lavalier condenser microphone that's  truly optimized intended for use in speech reproduction in broadcast, television, theater, and video production. The omnidirectional polar pattern is capable of picking up sound from all directions and its 40 Hz to 20 kHz frequency response comes with a slight high-frequency boost for enhancing the vocal clarity.

The injection-molded body is shockproof and protected from RF interference. The flexible 5’ cable is providing the isolation from noise that are caused by material rubbing against it. The included windscreen is reducing wind noise and the supplied clips are enabling the versatile mounting configurations. The VT500 comes including a waterproof carrying case.

Connector
LEMO 3-pin connector for Sennheiser SK series transmitters

Compatibility
Works with Sennheiser SK Series, 2000 Series, Lectrosonics SSM, Audio Ltd. miniTX (En2), Audio Ltd. miniTX (2040), and Audio Ltd. 1010 Digital body-pack transmitters

Wide Flat Frequency Response
The lavalier is featuring a wide, flat frequency response designed for transparent signal reproduction

Omnidirectional Polar Pattern
The omnidirectional pattern are providing pick up from all around the microphone's capsule

RF Suppression Filter
Radio-frequency noise is suppressed with the use of an internal RF filter

Flexible Mounting Options
A variety of mounting clips are included for versatility in attachment methods

Transducer Electret Condenser
Polar Pattern Omnidirectional
Frequency Response 40 Hz to 20 kHz
Signal-to-Noise Ratio 26 dBA weighted
Maximum Input Sound Level 118 dB
Sensitivity -59 dB ±3 dB re 1 V/microbar (11.22 mV/Pa)
Power Requirements 1.3 V (0.9 to 20 V)
Current Drain 25 µA
Output Impedance 3 kOhms
Output Connector LEMO 3-pin
Pad No
Low Frequency Roll-Off No
Cable Length 5' / 1.5 m
Cable Diameter 0.1" / 1.5 mm
Dimensions (H x W x D) 0.5 x 0.3 x 0.1" / 13.0 x 7.0 x 3.5 mm
Weight 0.25 oz / 7 g