Shure GLXD24/SM86 Vocal System with GLXD4 Wireless Receiver, GLXD2 Handheld Transmitter with SM86 Microphone (SB902 Battery included)

Shure GLXD24/SM86 Vocal System with GLXD4 Wireless Receiver, GLXD2 Handheld Transmitter with SM86 Microphone (SB902 Battery included)

A GLXD4 wireless receiver and a GLXD2 handheld transmitter with a Beta 58A microphone element is included the GLXD24/SM86 Handheld Wireless System from Shure. The GLXD24/SM86 is operated on the 2.4GHz ISM band in the Z2 frequency band between 2400 and 2483.5MHz. 

Shure's LINKFREQ automatic frequency management is featured in both the GLXD2 transmitter and the GLXD4 receiver that allows them to scan for the clearest frequency and can automatically link to each other without the requirement of any other setup from you besides turning both the units on. Both the transmitter & receiver automatically switch to the clearest frequencies available to avoid interference and dropout with their continuous interference monitoring.

The GLXD2 includes a rechargeable battery pack that provides up to 16 hours of operation on a full charge. It can be charged right in the GLXD4 receiver thanks to its integrated transmitter battery charging station. The system has a 200' range of operation and can be used with 7 other GLX-D systems simultaneously.

• Outputs: 1x XLR Output
  1x 1/4" (6.35 mm) Output
• Output Impedance: XLR: 100 Ω
  1/4": 100 Ω, 50 Ω unbalanced
• Maximum Audio Output Level Analog: XLR: 1 dBV (into 600 Ω load)
  1/4": 8.5 dBV (into 3 kΩ load)
• Tuning Frequency Range: 2400 to 2483.5 MHz
  Range of Operation: 200' (60 m)
• (typical, depends on RF signal absorption, reflection, and interference)
• Transmit Mode: Frequency Hopping
• Frequency Response: 20 Hz to 20 kHz
• Dynamic Range: 120 dB, A-weighted
• RF Sensitivity: -88 dBm, typical
  
• Total Harmonic Distortion: 0.2%, typical
• RF Output: 10 mW E.I.R.P., maximum
• Operating Temperature Range: 0° to 135°F (-18° to 57°C)
• Storage Temperature Range: -20° to 165°F (-29° to 74°C)
• Pin Configuration: XLR: 1= ground, 2= hot, 3=cold
  1/4": Tip= audio, ring= no audio, sleeve= ground
• Antenna: Impedance: 50 Ω
  Type: 1/2 wave sleeve dipole, non-removable
  Max Input Level: -20 dBm
• Power Requirements: 14 to 18 V DC (tip positive with respect to ring), 550 mA
• Spurious Rejection: >35 dB, typical
• Gain Adjustment Range: -20 to 40 dB in 1 dB steps
• Phantom Power Protection: Yes
• Housing: Molded plastic
• Dimensions (HxWxD): 1.6 x 7.2 x 4.6" (40 x 183 x 117 mm)
• Weight: 10.1 oz (286 g)

Transmitter

• RF Power Output: 10 mW E.I.R.P, maximum
• Maximum Input Level: 147 dB SPL
• Power Requirement: 3.7 V Rechargeable Li-Ion
• Battery Life: Up to 16 hours
• Operating Range: Indoors: Up to 100' (30 m) typical, with a maximum of  200' (60m)
  Outdoors: Up to 65' (20 m) typical, with a maximum of 165' (50 m)
• Housing: Molded plastic
• Dimensions: Body Length: 9.9" (252 mm)
  Body Width: 1.5" (37 mm)
  Capsule Width: 2" (51 mm)
• Weight: 9.3 oz (264 g), without batteries

Microphone

• Type: Dynamic (Moving Coil)
• Frequency Response: 50 Hz to 16 kHz
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level:
  Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL