Shure Wireless GLXD24R VOCAL SYSTEM WITH BETA58A Microphone

Shure Wireless GLXD24R VOCAL SYSTEM WITH BETA58A Microphone

The GLXD4R rackmount receiver, a GLXD2/Beta 58A handheld transmitter with integrated Beta 58A supercardioid dynamic microphone capsule, a microphone clip, an SB902 rechargeable lithium-ion battery, a USB charging cable, 2 detachable antennas, and rackmount hardware is included in Shure’s 2.4 GHz GLXD24R/B58 Handheld Wireless System with Beta 58A Microphone from Shure. GLXD24R/B58 can also be used to capture audio for meetings, conferences, speeches and more.

The wireless system features an intelligent rechargeable battery, RF performance, automatic frequency management, and increased channel count for speech and spoken word applications. The Beta 58A vocal microphone capsule is optimized for lead vocal performance and delivers wireless audio with digital clarity and reliability. It is part of the GLX-D Advanced wireless systems family.

GLXD2 Handheld Transmitter with Beta 58A Microphone Element (Z2 Band: 2400 - 2483.5 MHz)

The GLXD2 Handheld Transmitter with Beta 58A Microphone Element from Shure is designed to work with Shure's GLX-D series digital wireless systems. It operates on Shure's Z2 frequency band between 2400 and 2483.5 MHz on a 2.4 GHz ISM wireless band. The transmitter provides up to a 200' range of operation and features Shure's LINKFREQ automatic frequency management that allows it to automatically link to a GLX-D compatible transmitter without having to perform any setup. It includes a rechargeable battery pack that provides up to 16 hours of performance time per charge. The battery can be recharged with the included USB charger cable or with the integrated charger in the GLXD4 wireless receiver. A 15-minute charge can provide up to 1.5 hours of performance time.

GLXD2 Handheld Transmitter with Beta 58A Microphone Element (Z2 Band: 2400 - 2483.5 MHz)

Transmitter

• RF Power Output: 10 mW E.I.R.P, maximum
• Maximum Input Level: 147 dB SPL
• Power Requirement: 3.7 V Rechargeable Li-Ion
• Housing:  Molded plastic
• Dimensions:           Body Length: 9.9" (252 mm)
                                  Body Width: 1.5" (37 mm)
                                  Capsule Width: 2" (51 mm)
• Weight:                   9.4 oz (267 g), without batteries

Microphone

• Type: Condenser (electret bias)
• Frequency Response: 50 Hz to 20 kHz
• Polar Pattern:  Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
• Output Level: Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL

Packaging Info

• Configuration: XLR Output: Balanced
• 1/4" / 6.35 mm Output: Impedance balanced
• Impedance: XLR Output: 100 Ohms
• 1/4" / 6.35 mm Output: 100 Ohms (50 Ohms, unbalanced)
• Full Scale Output: XLR Connector:
• Line Setting: +18 dBV
• Mic Setting: -12 dBV
• 1/4" / 6.35 mm Output: +12 dBV
• Pin Assignments: XLR Output: 1=ground, 2=hot, 3=cold
• 1/4" / 6.35 mm Connector: Tip=audio, Ring=no audio, Sleeve=ground
• Mic/Line Switch: 30 dB pad
• Spurious Rejection: >35 dB, typical
• Gain Range: -18 to 42 dB in 1 dB steps
• Phantom Power Protection: Yes

Receiver Antenna Input

• Housing: Steel
• Power: Power Requirements: 14 to 18 VDC (Tip positive with respect to ring), 550 mA
• Dimensions (H x W x D): 1.7 x 7.8 x 6.4" / 42.0 x 197.0 x 163.0 mm
• Weight: 32.0 oz / 907.2 g
• Packaging Info
• Box Dimensions (LxWxH): 18.3 x 14.8 x 4.3"