Alesis Strike Amp 8 2,000 Watt 1x8 Electronic Drum Amplifier
Vendor: Alesis
Unavailable
Alesis Strike Amp 8 2,000 Watt 1x8 Electronic Drum Amplifier
The Alesis Strike Amp 8 is a professionally designed 2000W powered speaker that's carefully created capable of delivering punch and clarity to any electronic drumming setup. The speaker comes providing amp headroom intended for use in any performance or practice space.
The 2000W amplifier comes capable of delivering an 1300W to the specially designed 8" woofer and 700W to the 1/4" neodymium high-frequency driver, which are combining to offer a frequency response of 62 Hz to 20 kHz at a respectable 129 max SPL. The 8" woofer is featuring a 2.5" high-temperature voice coil, and the high-frequency driver is created out of neodymium and sporting a precision waveguide all at the same time.
The rear panel comes offering two combo XLR-1/4" inputs that comes along with volume controls, and an XLR output for connecting to additional speakers. Additionally, there is a Contour switch, which boosts the high and low frequency by +3 dB and a ground lift switch to prevent ground loops and hum. The system includes protection circuits for electronic clipping and thermal and transducer overdrive.
The Strike Amp 8's trapezoidal tilt-back enclosure is made from injection-molded polypropylene and features a steel grille and a 1-3/8" pole cup. The speaker ships with a standard IEC power cord.
- 2000W of peak power delivers clarity, punch, and more than enough headroom for any performance or practice space
- Specially voiced 8" woofer and high-frequency compression driver deliver your drum sounds with precise, full response across the entire frequency range without any artificial coloration
- Two XLR/1/4" TRS combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 8 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground lift switch eliminates unwanted noise
Output Power | 2000 W (Peak, 1300 LF + 700 HF) 1000 W (Continuous RMS, 650 LF + 350 HF) |
Drivers | Low-Frequency: 8" / 20.3 cm, 2.5" / 6.4 cm High-Temperature Voice Coil High-Frequency: 1.4" / 3.6 cm |
Crossover Frequency | 2.5 kHz |
Max SPL | dB SPL at 3.3' / 1 m Peak: 129 dB Continuous: 126 dB |
Frequency Response | 62 Hz to 20 kHz (±3 dB) |
Frequency Range | 52 Hz to 22 kHz (-10 dB) |
Horn Coverage | HxV: 90 x 60° Nominal |
Equalization | Contour Switch: Boosts Low and High Frequency by +3 dB |
Connectors | 2 x Combo XLR-1/4" / 6.35 mm Inputs 1 x XLR Link Output 1 x IEC Power Cable Input |
Controls | Power Switch 2 x Volume Control Knobs EQ Contour Switch Ground Lift Switch |
Indicators | Power LED (Rear Panel) Clip Limiter LED |
Protection | Electronic Clip, Thermal, and Transducer Overdrive |
Power | Connection: IEC Input Voltage: 100, 110-120, 220-240 VAC, 50/60 Hz (Switchable) Fuse: 100-120V T10AL AC250V 220-240V T5AL AC250V Consumption: 800 W |
Enclosure | Trapezoidal, Injection-Molded Polypropylene Enclosure with Perforated Steel Grille |
Mounting | Standard 1.4" / 35.1 mm Pole Cup |
Dimensions (H x W x D) | 17.1 x 10.1 x 9.6" / 43.4 x 25.7 x 24.4 cm |
Weight | 20.2 lb / 9.2 kg |