Audio Technica AT4041SP, 40 Series Studio Mic Pack
Vendor: Audio Technica
Available
Audio Technica AT4041SP, 40 Series Studio Mic Pack
Audio Technica AT4041SP studio packs offers a two AT4041 studio condenser microphones. And this Audio Technica AT4041SP is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. Also, Audio Technica AT4041SP has a features of smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for every high SPL-handling capability. The element Audio Technica AT4041SP has also a back plate that holds a fixed charge and has been aged to provide energy stabilization. Another thing is Audio Technica AT4041SP is the surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.
Product Highlights of the Audio Technica AT4041SP
- Smooth, extended frequency response with a slight rise occurring in the high-frequency region
- Ideal for drum overheads, acoustic guitar, piano, horns and under snare
- Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
- Switchable hi-pass filter and rugged turned-brass microphone housing
ELEMENT | Fixed-charge back plate, permanently polarized condenser |
POLAR PATTERN | Cardioid |
FREQUENCY RESPONSE | 20-20,000 Hz |
LOW FREQUENCY ROLL-OFF | 80 Hz, 12 dB/octave |
OPEN CIRCUIT SENSITIVITY | -36 dB (15.8 mV), re 1V at 1 Pa |
IMPEDANCE | 100 ohms |
MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D. |
DYNAMIC RANGE (typical) | 121 dB, 1 kHz at Max SPL |
SIGNAL-TO-NOISE RATIO | 70 dB, 1 kHz at 1 Pa |
PHANTOM POWER REQUIREMENTS | 48V DC, 3.2 mA typical |
SWITCH | Flat, roll-off |
WEIGHT | 4.2 oz (120 g) |
DIMENSIONS | 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter |
OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case |
AUDIO-TECHNICA CASE STYLE | S1 |