Audio Technica ATW-1101/H92-TH, System 10 Digital Wireless

Vendor: Audio Technica
Descriptions Audio Technica ATW-1101/H92-TH, System 10 Digital Wireless The Audio Technica ATW-1101/H92-TH is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require...
$379.95
Title

Audio Technica ATW-1101/H92-TH, System 10 Digital Wireless

The Audio Technica ATW-1101/H92-TH is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require articulate vocal reproduction. Audio Technica ATW-1101/H92-TH set includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the beige PRO 92cW-TH headworn microphone. Audio Technica ATW-1101/H92-TH uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Audio Technica ATW-1101/H92-TH built for expandability so you can use up to eight systems simultaneously.

Product Highlights of the Audio Technica ATW-1101/H92-TH

  • Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems
  • Microphone designed to withstand everyday wear and tear
  • Includes clothing clip to prevent the weight of the cable from pulling the headset
  • Includes pouch for mic storage
  • Level controls on transmitter and receiver
  • Pair indicator illuminates on receiver when synced with transmitter
  • AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping
System Specifications
Operating Frequencies  2.4 GHz ISM band
Dynamic Range  >109 dB (A-weighted), typical
Total Harmonic Distortion  <0.05% typical
Operating Range  30 m (100') typical
Operating Temperature Range  0 to +40° C (32 to 104° F)
Frequency Response  20 Hz to 20 kHz
Audio Sampling  24 bit, 48 kHz
Receiver  
Receiving System  Diversity (frequency/time/space)
Output Connections  1x XLR, balanced
 1x 1/4" (6.3 mm), unbalanced
Maximum Output Level  Balanced: 0 dBV
 Unbalanced: +6 dBV
Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive,   switched mode external power supply
Dimensions  7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm)
Weight  10.2 oz (290 g)
Transmitter
RF Output Power  10 mW
Spurious Emission  Following federal and national regulations
Input Connections  1x 4-pin locking connector
 
 Wiring:
 Pin 1: GND
 Pin 2: INST INPUT
 Pin 3: MIC INPUT
 Pin 4: DC BIAS +9V
Batteries  2x 1.5V AA (not included)
Battery Life  >7 hours (alkaline)
Dimensions  2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm)
Weight  3.5 oz (100 g), without batteries
Microphone
Element  Condenser
Polar Pattern  Omnidirectional
Frequency Response  20 Hz - 20 kHz
Open Circuit Sensitivity  -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level  116 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-Noise Ratio  60 dB, 1 kHz at 1 Pa
Current Consumption  0.3 mA typical @ 5V
Voltage Range  1.5 - 9V
Connector  Locking 4-Pin HRS connector
Cable Length  55" (1.4 m)
Dimensions  0.85" (21.7 mm), microphone length
 0.36" (9.2 mm), microphone diameter
 4.33" (110.0 mm), boom length
 0.09" (2.4mm), boom diameter
Weight  0.14 oz (4.0 g), mic and boom
 0.84 oz (24.0 g), mic, boom, connector and cable