Audio Technica ATW-901A/G, System 9 Wireless System
Vendor: Audio Technica
Available
Audio Technica ATW-901A/G, System 9 Wireless System
Audio Technica ATW-901A/G is a system 9 VHF Wireless Unipak System and designed for live sound reinforcement applications. The system of the Audio-Technica ATW-901A/G consists of a wireless VHF receiver, and a bodypack transmitter and an AT-GcW guitar/instrument input cable.
The Audio-Technica ATW-901A/G receivers utilizes two dipole antennas for extended range, allowing you to select your VHF transmission frequency from 169.505, 170.245, 171.045, or 171.905 MHz. Also, the Audio-Technica ATW-901A/G includes LED indicator lights for channel, RF and AF peak. The back of the Audio-Technica ATW-901A/G receiver features a volume control knob, a squelch control knob a balanced XLR audio output and an unbalanced 1/4" audio output. Also, the Audio-Technica ATW-901A/G receiver also includes a power cord hook to prevent accidental pull-out of the DC power supply.
The bodypack transmitter is powered by two AA batteries and includes variable microphone and instrument trim, channel selection DIP switches, a Power/Mute button, and a Unipak input connector.
Audio-Technica ATW-901A/G Product Features
- 169.505 to 171.905 MHz
- Dipole Antenna for Extended Range
- Channel, RF, and AF Peak Indicator LEDs
- Balanced XLR & Unbalanced 1/4" Outputs
Type | VHF High Band |
Operating Frequencies | 169.505, 170.245, 171.045, 171.905 MHz |
Modulation Mode | FM |
Maximum Deviation | ±10 kHz |
Dynamic Range | ≥90 dB (A-weighted), typical |
Operating Range | 200' (61.0 m), open range environment with no interfering signals |
Operating Temperature Range | 40 to 110° F (4 to 43° C), battery performance may be reduced at very low temperatures |
Frequency Response | 80 to 13,000 Hz |
Receiving System | Non-diversity, single-channel, dual-antenna system |
Image Rejection | 50 dB minimum |
Audio Output | Nominal Output Level Balanced XLR: 350 mV (1 kHz modulation, 10 kHz deviation, 100-kOhm load) Unbalanced 1/4" (6.3 mm): 700 mV (1 kHz modulation, 10 kHz deviation, 100-kOhm load) |
Power Supply | 100 to 240 VAC (50/60 Hz) to 12 VDC at 0.5 A (center positive) switched mode external power supply |
Dimensions (W x H x D) | 7.48 x 1.82 x 5.06" (190 x 46.2 x 129 mm) |
Weight | 12.0 oz (337 g) |
RF Power Output | High: 10 mW |
Spurious Emission | Following federal and national regulations |
Input Connections | Four-pin, Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: BIAS +9 VDC |
Batteries | Two 1.5 V AA (not included) |
Current Consumption | 8 hours (alkaline), depending on battery type and use pattern |
Dimensions (W x H x D) | 2.76 x 4.08 x 0.98" (70.2 x 104 x 24.9 mm) |
Weight | 2.8 oz (79 g) (without batteries) |