Audix AP41FLUTEB, WIRELESS,R41,BODY PACK, W/ADX10FLP, Single-Channel Flute Wireless System

Vendor: Audix
Descriptions Audix AP41FLUTEB, WIRELESS,R41,BODY PACK, W/ADX10FLP, Performance Series Single-Channel Flute Wireless System with ADX10FLP Miniaturized Condenser Microphone (554 to 586 MHz) The Audix AP41FLUTEB features a performance series single-channel flute wireless system from Audix includes...
$759.00 $919.00
Title

Audix AP41FLUTEB, WIRELESS,R41,BODY PACK, W/ADX10FLP, Performance Series Single-Channel Flute Wireless System with ADX10FLP Miniaturized Condenser Microphone (554 to 586 MHz)

The Audix AP41FLUTEB features a performance series single-channel flute wireless system from Audix includes the R41 1-channel diversity receiver, B60 bodypack transmitter, and ADX10FLP miniature cardioid condenser flute microphone. The R41 that includes in Audix AP41FLUTEB is a diversity receiver that can operates on a frequency range of 522 to 544 MHz. Audix AP41FLUTEB offers one-touch auto scan searches for clear channel. A big thanks to one-touch sync function, the receiver easily links to the B60 bodypack transmitter placed within 300'. In addition, the Audix AP41FLUTEB microphone can be connected to the bodypack transmitter using a mini XLR-terminated cable (included with the microphone)

Another thing in Audix AP41FLUTEB is specifically designed for use with a standard-sized flute, the microphone includes an integrated clip that attaches to the headstock of the flute. It reproduces the natural tone and percussive nature of the flute with detail and accuracy. The tight pickup pattern of the Audix AP41FLUTEB microphone helps to isolate the flute from the rest of the instruments on stage.

Audix AP41FLUTEB Product Features

Audix R41 Kit-B Performance Series Single-Channel UHF Diversity Receiver (B: 554 to 586 MHz)

  • Incorporate up to 16 systems to use 16 unique channels simultaneously
  • Single-channel receiver supports one wireless microphone
  • 32 MHz wide spectrum tuning
  • 106 pre-coordinated frequencies
  • High-contrast LCD shows RF and AF signal strength, group/channel/frequency, level/squelch, battery level, and more
  • One-touch sync via infrared
  • One-touch scan eliminates inefficient manual tuning
  • Ground-lift switch helps eliminate ground loops or hum
  • Metal strain relief for power cable
  • Adjustable AF and RF level
  • Selectable lock function prevents the transmitter from being accidentally muted or powered off

Audix B60 Performance Series Bodypack Transmitter (522 to 586 MHz)

  • 64 MHz bandwidth from 522 to 586 MHz covers A and B frequency groups
  • Mini-XLR 3-pin connector for compatibility with a variety of microphones or guitar cables
  • Durable tour-worthy metal housing
  • High-contrast LCD shows group, channel, frequency, mic/line level, and battery status
  • Convenient top-panel soft mute button for quick on/off switching
  • Two supplied AA batteries provide up to 14 hours of run time
  • Selectable 10/30 mW RF power output
  • Choose mic or line level
  • Four selectable gain settings—0 dB, -6 dB, -12 dB, and -24 dB
  • Lock function deactivates the power button, RF output control, and level adjustment

Audix R41 Kit-B Performance Series Single-Channel UHF Diversity Receiver (B: 554 To 586 MHz) Specs

Frequency Band  554 to 586 MHz
Bandwidth  32 MHz
# Of Simultaneous Systems  Up to 16
Switchable Frequencies  106 pre-coordinated frequencies
Wireless Range  Up to 300' / 91 m
Antenna Connector  2 x BNC (8 VDC, 150 mA)
Outputs  1 x XLR 3-pin balanced
 1 x 1/4" TS unbalanced
Audio Output Level  XLR: -12 dBV at 25 kHz deviation, 600-Ohm   load, +6 gain
 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load,   +6 gain
Audio Level Control  -12 to +9 dB in 3 dB steps
Frequency Response  45 Hz to 18 kHz
Compander  2:1
Pilot Tone  32 kHz
Receiving System  Single tuner, antenna diversity
Signal to Noise Ratio  105 dB at 30 kHz deviation (A-weighted)
Total Harmonic Distortion (THD)  ≤0.7% (33 kHz deviation at 1 kHz)
Sensitivity  5 dBµV (S/N 60 dB at 25 kHz deviation, A-   weighted)
Power Requirement  100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A
Dimensions (W x D x H)  8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm
Weight  1.9 lb / 0.9 kg

 

Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz) Specs

RF Power Output  10/30 mW
Bandwidth  64 MHz
Gain Adjustment  0 dB, -6 dB, -12 dB, -24 dB
Inputs  1 x mini-XLR 3-pin
Input Impedance  Mic: 10 kOhms
 Line: 1 MOhm
Maximum SPL  Approximately 128 to 140 dB (depending on   microphone)
Battery Life  Approximately 14 hours
Current Consumption  110 mA typical
Power Requirement  2 x AA 1.5 V batteries
Dimensions (W x L x D)  2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm
Weight  3 oz / 85 g without batteries
Audix ADX10-FL Flute Mounted Miniature Cardioid Condenser Lavalier Microphone With APS-910 Power Supply And Short Cable (42 Inches) Specs
Transducer  Condenser
Polar Pattern  Cardioid
Frequency Response  50Hz to 18kHz
Dynamic Range (Typical)  not specified by manufacturer
Signal-to-Noise Ratio  not specified by manufacturer
Maximum Input Sound Level  130dB
Power Requirements  APS-910 Phantom Power Supply
Output Impedance  1000 ohms
Output Connectors  42" (1.06 meter) cable with 3-pin XLR output
Pad  No
Low Frequency Roll-Off  No
Dimensions  not specified by manufacturer
Weight  not specified by manufacturer