Audix AP41HT7BGA, WIRELESS,R41,BODY PACK, W/HT7, BEIGE, Headset Wireless System (A Band/522-554 MHz/Beige)
Vendor: Audix
Available
Audix AP41HT7BGA, WIRELESS,R41,BODY PACK, W/HT7, BEIGE, Headset Wireless System (A Band/522-554 MHz/Beige)
The Audix AP41HT7BGA features its performance series single-channel bodypack wireless system form Audix and includes the R41 1-channel diversity receiver, B60 bodypack transmitter and black HT7 single-ear miniaturized condenser microphone. the R41 that includes in the Audix AP41HT7BGA receiver can operates on a frequency range of 552 to 554 MHz and offers one-toch auto scan searches for clear channel. A big thanks to the one touch sync function, the Audix AP41HT7BGA receiver easily links to the B60 bodypack transmitter placed within 300'
The Audix AP41HT7BGA microphone can be connected to the bodypack transmitter via the integrated 3-pin mini XLR-terminated cable. This omnidirectional Audix AP41HT7BGA microphone features a comfortable ear piece that can be worn around the left or right ear with a durable adjustable length boom arm.
Audix AP41HT7BGA Product Features
R41 Diversity Receiver
- 32 MHz Wide spectrum receiver
- 106 Pre-coordinated frequencies for quick, easy and reliable set up
- One-touch auto scan searches for clear channel
- One-touch sync links transmitter to receiver via infrared beam
B60 Bodypack Transmitter
- 64 MHz Wide spectrum transmitter
- Durable metal housing
- 10 Hour run time - AA batteries
HT7 Headworn Condenser Microphone
- Hands free, headworn vocal microphone, available in Black or Beige
Available Frequency Bands
- A = 522 MHz - 554 MHz
- B = 554 MHz - 586 MHz
Audix R41 Kit-A Performance Series Single-Channel UHF Diversity Receiver (A: 522 To 554 MHz)<span> </span>Specs
Manufacturer WarrantyFrequency Band | 522 to 554 MHz |
Bandwidth | 32 MHz |
# Of Simultaneous Systems | Up to 16 |
Switchable Frequencies | 106 pre-coordinated frequencies |
Wireless Range | Up to 300' / 91 m |
Antenna Connector | 2 x BNC (8 VDC, 150 mA) |
Outputs | 1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced |
Audio Output Level | XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain |
Audio Level Control | -12 to +9 dB in 3 dB steps |
Frequency Response | 45 Hz to 18 kHz |
Compander | 2:1 |
Pilot Tone | 32 kHz |
Receiving System | Single tuner, antenna diversity |
Signal to Noise Ratio | 105 dB at 30 kHz deviation (A-weighted) |
Total Harmonic Distortion (THD) | ≤0.7% (33 kHz deviation at 1 kHz) |
Sensitivity | 5 dBµV (S/N 60 dB at 25 kHz deviation, A- weighted) |
Power Requirement | 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A |
Dimensions (W x D x H) | 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm |
Weight | 1.9 lb / 0.9 kg |
Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs
Manufacturer WarrantyRF Power Output | 10/30 mW |
Bandwidth | 64 MHz |
Gain Adjustment | 0 dB, -6 dB, -12 dB, -24 dB |
Inputs | 1 x mini-XLR 3-pin |
Input Impedance | Mic: 10 kOhms Line: 1 MOhm |
Maximum SPL | Approximately 128 to 140 dB (depending on microphone) |
Battery Life | Approximately 14 hours |
Current Consumption | 110 mA typical |
Power Requirement | 2 x AA 1.5 V batteries |
Dimensions (W x L x D) | 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm |
Weight | 3 oz / 85 g without batteries |
General
Product Type | Microphone |
Height | 1.6 in |
Weight | 0.25 oz |
Color | Beige |
Body Material | Alloy steel |
Recommended Use | Professional audio - voice, broadcast |
Type | Boom |
Microphone Technology | Condenser |
Microphone Operation Mode | Omni-directional |
Connectivity Technology | Wired |
Sensitivity | 17 mV/Pascal |
Impedance | 2 kOhm |
Frequency Response | 20 - 20000 Hz |
Max Sound Pressure | 135 dB |
Features | Phantom power |
Connector Type | Microphone (3 pin mini-XLR) |
Cables Included | Microphone cable - detachable - 4 ft |
Included Accessories | Carrying pouch, foam windscreen |
Service & Support | Limited warranty - 1 year |