Audix AP61L10, WIRELS,R61,BP, W/ADX10 LAV 522-586MHz, Combination R61 True Diversity Receiver and B60 Bodypack Transmitter with ADX10 Lavalier Microphone
Vendor: Audix
Available
Audix AP61L10, WIRELS,R61,BP, W/ADX10 LAV 522-586MHz, Combination R61 True Diversity Receiver and B60 Bodypack Transmitter with ADX10 Lavalier Microphone
The Audix AP61L10 features its professional true diversity lavalier wireless system featuring the Audix ADX10 cardioid miniature condenser microphone.
The Audix ADX10 in Audix AP61L10 features its lightweight with low profile mic designed for lavalier applications such as speech, presentation and theatrical production. The Audix ADX10 has the ability to accurately capture and create vocals from a comfortable distance of 4-8 inches, the Audix ADX10 has a natural sound with exceptional response that is resistant to feedback and easy to use.
Another best thing in Audix AP61L10 it has a single space rackmount kit with BNC cables for front mounting antennas is included. Optional accessories include rackmount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels).
Audix AP61L10 Product Features
R61 True Diversity Receiver
- 64 MHz Wide spectrum tuning receiver
- 207 Pre-coordinated frequencies for quick, easy and reliable set up
- One-touch auto scan searches for clear channel
- One-touch sync links transmitter to receiver via infrared beam
- 2560 tunable frequencies
B60 L10 Bodypack Transmitter
- 64 MHz Wide spectrum transmitter with ADX10 lavalier
- Durable metal housing
- 14 Hour run time - AA batteries
Audix R61 Kit Single-Channel Wireless True Diversity Receiver (522 To 586 MHz)<span> </span>Specs
Frequency Band | 522 to 586 MHz |
Bandwidth | 64 MHz |
# Of Simultaneous Systems | Up to 24 |
Switchable Frequencies | 207 pre-coordinated frequencies |
Reception Frequencies | 2560 tunable frequencies (spaced 25 kHz apart) |
Wireless Range | Up to 450' / 137 m |
Antenna Connector | 2 x BNC (8 VDC, 150 mA) |
Outputs | 1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced |
Audio Output Level | XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain |
Audio Level Control | -12 to +9 dB in 3-dB steps |
Frequency Response | 45 Hz to 18 kHz |
Compander | 2:1 |
Pilot Tone | 32 kHz |
Receiving System | Dual tuner, true diversity |
Signal to Noise Ratio | 112 dB at 30 kHz deviation (A-weighted) |
Total Harmonic Distortion (THD) | <0.4% (33 kHz deviation at 1 kHz) |
Sensitivity | 5 dBµV (S/N 60 dB at 25 kHz deviation, A- weighted) |
Power Requirement |
100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A |
Enclosure Material | Metal |
Dimensions (W x D x H) | 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm |
Weight | 2.4 lb / 1.1 kg |
Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs
RF Power Output | 10/30 mW |
Bandwidth | 64 MHz |
Gain Adjustment | 0 dB, -6 dB, -12 dB, -24 dB |
Inputs | 1 x mini-XLR 3-pin |
Input Impedance | Mic: 10 kOhms Line: 1 MOhm |
Maximum SPL | Approximately 128 to 140 dB (depending on microphone) |
Battery Life | Approximately 14 hours |
Current Consumption | 110 mA typical |
Power Requirement | 2 x AA 1.5 V batteries |
Dimensions (W x L x D) | 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm |
Weight | 3 oz / 85 g without batteries |
Audix ADX10 Miniature Cardioid Condenser Lavalier Microphone<span> </span>Specs
Transducer | Condenser |
Polar Pattern | Cardioid |
Frequency Response | 50Hz to 18KHz |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | not specified by manufacturer |
Maximum Input Sound Level | 130dB |
Power Requirements | Audix Beltpack Transmitters or APS-910 Phantom Power Supply (not included) |
Output Impedance | 1000 ohms |
Output Connectors | Mini-XLR |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | not specified by manufacturer |
Weight | not specified by manufacturer |