Audix D2, MIC, DYN INST, CLIP & POUCH, Professional Dynamic Instrument Microphone

Audix D2, MIC, DYN INST, CLIP & POUCH, Professional Dynamic Instrument Microphone

The Audix D2 dynamic features an instrument is used for stage, studio and broadcast applications. The Audix D2 is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM diaphragm for natural, accurate sound reproduction

Also, the Audix D2 features an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets and brass. The Audix D2 has a transformer less design, low impedance and balanced output insure that the Audix D2 hypercardioid instrument microphone will perform interference-free.

ARCHITECT AND ENGINEER SPECIFICATIONS

The microphone shall be of the dynamic type operating on the moving coil principle and the capsule shall be VLM Type B. The polar pattern of the microphone shall be hypercardioid. The nominal output impedance shall be 280 ohms at 1 kHz.The microphone shall have a sensitivity of 1.2 mV / Pa at 1 kHz and shall handle a sound pressure level of ≥144 dB. The microphone body shall be machined of aluminum and the grill cap shall be steel wire mesh. The overall dimensions shall be 21.5 mm in diameter at the base, 39 mm in diameter at the widest point and 100 mm in length.

OPERATION AND MAINTENANCE

The Audix D2 is a low impedance microphone and should be plugged into a “mic level” input of your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be affected in any way by phantom power should it be running simultaneously while the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud “popping” noise which could seriously damage the speakers in the PA system provided when not in use. Moisture of any kind can adversely effect the sound and performance of your microphone.

Audix D2 Product Features

• Professional dynamic instrument mic for live sound or studio
•  Full response with punchy mid-bass
• VLM Capsule
• Designed, assembled & tested in the USA
• 5 year warranty

Transducer Type: Dynamic
Frequency Response: 68 Hz - 18 kHz
Polar Pattern : Hypercardioid
Output Impedance : 280 ohms
Sensitivity : 1.2 mV / Pa @ 1k
Capsule Technology : VLM Type B
Off-Axis Rejection : >30 dB
Maximum SPL : ≥144 dB
Power Requirements : None
Connector : 3-pin XLRm
Polarity : Positive pressure on diaphragm
produces positive voltage on
pin 2 relative to pin 3 of output
XLR connector
Materials / Finish : Black Hard Coat
Weight:128 g / 4.5 oz
Length: 100 mm / 3.9 in