Aviom D800 A-Net® Distributor, with A-Net Bridge input
Vendor: Aviom
Available
Aviom D800 A-Net® Distributor, with A-Net Bridge input
The Aviom D800 A-Net® Distributor is designed for providing the link between the console card and input module and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.
This unit is also integrate additional advanced options intended for delivering high-channel-count audio streams to your Personal Mixers, transmitters for wireless in-ear monitors and streamlining connections between A360s, integrating the A360 Display iOS app.
Simple setup. Powerful performance.
The Aviom D800, on the most basic level can do an unglamorous but important job: it is getting the audio and power to you Personal Mixers. Set-up is a breeze, with no switch, IP addressing, or routing managing to worry about, so in no time you can get set up and start mixing, without a lot of hassle.
Get more channels to your mixers
The Aviom D800 and D800-Dante is able to combine up to four 16-channel A-Net streams, it is used in conjunction with the SB4 System Bridge and Pro16 A-Net console cards (such as the Y1 A-Net Card for Yamaha®), for sending up to 64 channels directly from your digital console all the way to your Aviom Personal Mixers. By the use of A360 Channel Manager the mix channels can be individually selected for each A360 Personal Mixer, this allow each musician for mixing exactly the sources they need.
Grow your system
If you need more than eight Personal Mixers, both the D800 and the D800-Dante include an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.
Precision Engineered for Reliability
From the innovative power supply sub-system to the mechanical design to the whisper-quiet thermal management, the D800 and D800-Dante are built to give you rock-solid performance you can count on.
Network Mix Back for wireless in-ears
If you're using A360 Personal Mixers, the D800 and D800-Dante eliminate the need for running analog cables from A360s to the transmitter units for the in-ear monitors.
Extend the interface with iOS
The D800 and D800-Dante manage communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.
A-Net to/from Personal Mixers (front panel) | Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II) |
---|---|
A-Net In or A-Net Bridge In |
Accepts Pro16 or Pro16e A-Net; one locking RJ45 connector |
A-Net Out (rear panel) | Pro16e A-Net; one locking RJ45 connector, unpowered Supports system expansion and the A-16II, A320, and A360 Personal Mixers |
A-Net Mixes Out | Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal Mixers |
Ethernet | One RJ45 connector; for iOS A360 Display support |
LEDs | Power On (red); Sync (green) |
USB | Used for firmware updates |
A-Net Cables | Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections |
Output Voltage for Personal Mixers | 24VDC, 0.5 amp Transmitted over the Cat-5e cable |
Power Supply | Internal, universal switching type, IEC connector |
Input Voltage | 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4AL |
Dimensions | 19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) high |
Weight | 12.0 lbs (5.44 kg) |