Community CP6-B (Black) / CP6-W (White) 6.5-Inch Pendant Loudspeaker

Vendor: Community
Community CP6-B (Black) / CP6-W (White) 6.5-Inch Pendant Loudspeaker  The Community CP6-B for Black and Community CP6-W for White, is a Commercial Design series pendant speaker that's professionally designed providing high quality paging and musical performance....

Community CP6-B (Black) / CP6-W (White) 6.5-Inch Pendant Loudspeaker 

The Community CP6-B for Black and Community CP6-W for White, is a Commercial Design series pendant speaker that's professionally designed providing high quality paging and musical performance. It is carefully designed for use in open architecture spaces or any location where a stylish pendant form factor is truly needed. Uniform voicing throughout the Commercial Design Series comes meaning that the CP6-B is possible to be combined along with other members of the Commercial Design Series without compromising consistency from zone to zone. Community’s proprietary Tru-Phase waveguide comes producing a consistently wide conical polar response up to 16 kHz. The genuine coaxial design comes using a separate magnets for the LF and HF drivers for having reduced distortion and industry leading sensitivity, thereby it permits up to 3 dB greater output level while it also requires up to half the amplification power of competing products at the same time. An easy-access selector switch is conveniently located on the face of the loudspeaker for having an selectable 8 Ohm or 70V/100V operation, while an integrated rear cover is made for hiding all wiring and hanging hardware for an aesthetically pleasing installation at the same time.


  • Stylish, contoured contemporary pendant design
  • High intelligibility with exceptional uniform coverage
  • Same components and voicing as the Commercial Design ceiling and surface mount loudspeaker family
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase high-frequency waveguide
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • External loop-through Euroblock connectors
  • Integrated rear cover hiding all wires and hanging hardware
  • Face-mounted adjustable tap position selector switch
  • Selectable 8 ohm or 70V/100V operation
  • ETL listed to comply with UL1480
  • Loudspeaker Type: Two-way, full-range, coaxial pendant mount loudspeaker, 8 Ohm or 70V/100V operation
  • Operating Range: 70 Hz - 13.5 kHz (-10 dB)
  • Frequency Response: 100 Hz - 12.5 kHz (-3 dB)
  • Max Input Ratings (8 Ohm): 60W continuous, 150Wprogram, 21.9 volts RMS, 43.8 volts momentary peak
  • Transformer Taps:
    • 70V: 30W, 15W, 7.5W, 3.75W and 8 Ohm selectable
    • 100V: 30W, 15W, 7.5W, and 8 Ohm selectable
  • Distortion:
    • 500 Hz, 10% Full Power: 0.33% 2nd Harmonic, 0.55% 3rd Harmonic
    • 500 Hz, 1% Full Power: 0.25% 2nd Harmonic, 0.06% 3rd Harmonic
    • 2 kHz, 10% Full Power: 1.11% 2nd Harmonic, 0.80% 3rd Harmonic
    • 2 kHz, 1% Full Power: 0.67% 2nd Harmonic, 0.23% 3rd Harmonic
    • 8 kHz, 10% Full Power: 2.49% 2nd Harmonic, 0.21% 3rd Harmonic
    • 8 kHz, 1% Full Power: 0.30% 2nd Harmonic, 0.06% 3rdHarmonic
  • Sensitivity (1W/1m): 91 dB SPL (100 Hz to 12.5kHz 1/3 octave bands); 91 dB SPL (250 Hz to 4 kHz speech range)
  • Maximum Output:
    • 8 Ohms: 109 dB SPL / 115 dB SPL (peak)
    • 70V: 106 dB SPL / 112 dB SPL (peak)
    • 100V: 106 dB SPL / 112 dB SPL (peak)
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 7 Ohms @ 10 kHz
  • Nominal Coverage: 120º conical (1 kHz to 6 kHz+/- 65°); 120° conical (500 Hz to 6 kHz +/- 65°)
  • Axial Q / DI: 5.04 / 7.03, 500 Hz to 6 kHz
  • Crossover Frequency: 2 kHz
  • Recommended Signal Processing: 90 Hz, at 24dB/Oct high pass filter
  • Drivers: LF 1x 6.5" cone, HF 1x 3/4" exit compression driver
  • Driver Protection: Self-resetting solid state circuit breaker
  • Input Connection: Two 2-pole Euroblock connectors
  • Controls: Front-face wattage / low impedance selector switch
  • Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable
  • Finish: Black
  • Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to theloudspeaker bracket and Gripple® brand adjustable height cable fasteners.
  • Grille: Powder coated steel with safety line,black finish, paintable
  • Baffle: Reflex loaded UL 94V-0 rated ABS
  • Safety Features: Included safety cable. Eachcable has an SWL of 99 lbs (45 kg).
  • Safety Agency Ratings: ETL listed to complywith UL1480 and CSA60065. Suspension system and Gripple® brand cable fastenerlisted per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
  • Required Accessories: Electronic high passfilter
  • Supplied Accessories: Two PHK-15 pendant hangkits, Enclosure ABS plastic rear cover, Rear cover ingress weather plug
  • Optional Accessories:
    • PHK-30 30ft (9.1m) pendant hang kit
    • PHK-50 50ft (15.2m) pendant hang kit
    • PSC replacement Gripple™ speed clamp
    • PST-14 trimmable 14ft (4.3m) decorative split loom tubing
  • Dimensions:
    • Height: 13.629" (346.2 mm) enclosure
    • Diameter: 10.0" (254 mm) face
  • Weight: 8.1 lbs (3.7 kg)