Electro Voice PA 2400T Dual Channel Class AB Commercial Power Amplifier, 2 x 430 watts at 4 ohms, 2 x 400 watts at 70V/100

Vendor: Electro Voice
Description Electro Voice PA 2400T Dual Channel Class AB Commercial Power Amplifier, 2 x 430 watts at 4 ohms, 2 x 400 watts at 70V/100 The Electro Voice PA 2400T is a rackmount...
$900.00 $1,125.00
Title

Electro Voice PA 2400T Dual Channel Class AB Commercial Power Amplifier, 2 x 430 watts at 4 ohms, 2 x 400 watts at 70V/100

The Electro Voice PA 2400T is a rackmount 400W 2-channel power amplifier that is designed with a high-performance output transformer which is great to use for 50V/70V/100V systems or 4-/8-Ohm setups in offices, schools, retail spaces, houses of worship, and more. This amplifier is equipped with a simple, easy-to-use interface that comes with a power switch and indicator LEDs that can be found on the front panel, and the stepped level control and switches for the selectable 50/70/300 Hz high-pass filter and dual/parallel/bridged mode found on the rear at the same time. The Euroblock input and output connectors are all enhanced to provide a easy and quick setup.

  • Efficient performance for low impedance or distributed systems 
  • Ideal for sound reinforcement, paging, and life safety 
  • 400 W per channel for 4 Ω or 70/100 V lines
  • Bridged mono out for 860 W into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting
Weight Net 57.32lbs (26kg)
Depth 15.98" (406mm)
Width 19.02" (483mm)
Height 3.46" (88mm)
Amplifier Gain 34dB
Channels 2
Continuous Rated Power (1 kHz, THD 1%) 100v 430Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 430Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 430Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 430Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 215Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 400Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 400Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 400Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 200Watts
Crosstalk < < -75dB
DIM 30 < 0.1%
Frequency Response (-3 dB) 65Hz - 40kHz (-1dB, ref. 1kHz)
Impedance 4/8Ω (70V/100V)
Input Impedance (Balanced) > 20kΩ
Input Sensitivity 0 dBu (775mV) (@ rated output power or voltage, 1kHz)
Intermodulation Distortion (SMPTE) < 0.1%
Network Control (IRIS-Net) No
Number of Channels 2
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 400/200W (70V/100V-400)
Rated output power (*rated load) THD < 1%, 1kHz 430/215W (70V/100V-430)
Signal-to-Noise Ratio (A-weighted) 103dB
Slew Rate 25V/µs (70V-46, 100V-65)
Total Harmonic Distortion < 0.1%