Electro Voice TX1152FM 500 watts, 15-inch two-way dedicated vertical floor monitor, passive, 90° x 50° horn pattern, all-new SMX2151 woofer, DH3 compression driver, patent pending SST
Vendor: Electro Voice
Electro Voice TX1152FM 500 watts, 15-inch two-way dedicated vertical floor monitor, passive, 90° x 50° horn pattern, all-new SMX2151 woofer, DH3 compression driver, patent pending SST (Signal Synchronized Transducers), Backbone grille, angled input panel, rotatable logo, black EVCOAT.
The Electro Voice TX1152FM Tour-X Floor Monitor is a compact, and capable of a high output for use on small to medium-sized stages. When high-quality vocal and instrument output is required reach for this lightweight monitor package.
The Electro Voice TX1152FM's enclosure is utilizing a signal-synchronized transducers, a design that is aligning the woofer and compression driver by locating them on separate baffles, and is integrating a low distortion port between the baffles. This is offering the tremendous advantages over traditional flat baffle construction: the acoustic centers of the compression and driver woofer are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, this all achieve linear phase response: and the size of both baffles are smaller than a single baffle, that result in a smaller footprint.
It is also utilizing the DH3, high output 1.25" titanium compression driver, partnered to a Constant Directivity 90 degree x 50 degree horn.
The SMX2121 15" woofer has an FEA enhanced magnet structure and shorting ring fro ultra-low distortion. The crossover is using a steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and comes with a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover is resulting in a compact floor monitor totally capable to reach a very high output levels before feeding back.
A lot of features are making the Electro Voice TX1152FM well suited for floor monitor use. The internally braced enclosure is made out of a combination of plywood and MDF, and coated with EVCoat for ultimate strength and durability. The unique grille design is very strong and dent resistant, and features a rotatable logo. 4-way handles are allow for gripping the Electro Voice TX1152FM in a variety of positions. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, keeping the connectors hidden and away from the performers on stage.
- Two-way, high-output design
- Vented LF enclosure
- Neutrik Speakon® paralleled pass-through connectors
- Two integrated handles
- Ideal for small-to-medium stages
- Signal Synchronized Transducers™ for woofer/tweeter alignment
- Ultra low-distortion SMX2151 woofer with fully symmetric drive
- 1.25-inch DH3/2010A titanium HF compression driver
- Constant-directivity 90º H x 50º V horn
- Integrated 24 dB/octave crossover with HF protection
- 100 dB sensitivity, 133 dB maximum SPL
- Power handling: 500 W continuous, 2000 W peak
- Black EVCoat™ finish
|Frequency Range (-10 dB)||45 - 20000kHz|
|Weight Net||51.81lbs (23.5kg)|
|Coverage (Nominal -6 dB) H||90°|
|Coverage (Nominal -6 dB) V||50°|
|Enclosure Material||Plywood and MDF with EVCOAT|
|Frequency Response (-3 dB)||65 - 20000Hz|
|Input Connections||Parallel Neutrik® NL4|
|Max. SPL/1m (calc)||133dB|
|Nominal Impedance (Passive)||8Ω|
|Powered or Passive||Passive|
|Recommended High-Pass Frequency||45Hz|
|Sensitivity 1 W/1 m||100dB|
|System Power Handling (Continuous/Program/Peak)||500Watts|