Focusrite RedNet A8R 8 Channel 24/192 Analogue Dante I/O Interface with Redundant Network & Power

Vendor: Focusrite
Focusrite RedNet A8R 8 Channel 24/192 Analogue Dante I/O Interface with Redundant Network & Power The Focusrite RedNet A8R is joining the company's collection of 1U Dante equipped interfaces with network & power...
$2,849.99 $3,419.99
Title

Focusrite RedNet A8R 8 Channel 24/192 Analogue Dante I/O Interface with Redundant Network & Power

The Focusrite RedNet A8R is joining the company's collection of 1U Dante equipped interfaces with network & power redundancy. The unit provides 8-channels of analog input and output with excellent-quality 24-bit/192 kHz analog-to-digital and digital-to-analog audio conversion, plus 2-channels of AES/EBU digital input and output to and from the Dante network.  

The converter is featured with the  power and network redundancy, along with 2- separate universal (100~240V) PSUs, which is including the IEC connectors with retaining clips and dual network interfaces on locking etherCON connectors. You can configure these ports remotely to redundant or switched (daisy-chain) mode. 

  • Eight channels of line-level analog input/output
  • 24-bit Focusrite conversion up to 192 kHz
  • Internally balanced throughout
  • Dante-based remote-controlled audio-over-IP connectivity
  • Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
  • Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU input/output
  • Analog input/output to AES59 standard on DB25 connectors
  • Comprehensive front-panel indicators
  • Software-based routing and control - no hardware patching required
Focusrite A8R Specs
  • Analog Inputs:Line Inputs: 8 Connectors: 1 x DB25 female, wired to AES59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.1 dB THD+N: <-100 dB (0.001%) unweighted, 20 Hz to 20 kHz; -1 dBFS input EIN: -96 dBu 'A'-Weighted (typical) SNR: 120 dB 'A'-Weighted (typical) Converter Dynamic Range: 120dB 'A'-Weighted (typical), 10 Hz to 20 kHz
  • Analog Outputs: Line Outputs: 8 Connectors: 1 x DB25 female, wired to AES59 0 dBFS Reference Levels: +18 or +24 dBu (switchable) Frequency Response: 20 Hz to 20 kHz, +/-0.1 dB THD+N: <-100 dB (0.001%) unweighted, 20 Hz to 20 kHz; +23 dBu input Noise in Presence of Signal: -94 dBu 'A'-Weighted (typical) Dynamic Range: 118 dB 'A'-Weighted (typical) Converter Dynamic Range: 120 dB (typical), 10 Hz to 20 kHz
  • Crosstalk:Input or Output to Input: <-100 dB unweighted, 20 Hz to 20 kHz; +23 dBu input Input or Output to Output: <-100 dB unweighted, 20 Hz to 20 kHz; -1 dBFS input/li>
  • Sample Rate Conversion:Sample Rate Range: 32 to 216 kHz Gain Error: -0.3 dB Dynamic Range: >138 dB THD + N: <-130 dB (0.00003%) Latency: 11 to 45 samples (network and sample rate dependent)
  • Digital Performance:Sample Rates: 44.1, 48, 88.2, 96, 176.4 and 192 kHz (-4%/-0.1%/+0.1%/+4.167%) @ 24-bit Clock Sources: Internal or from Dante Network Master External Word Clock Range: Nominal sample rate +/-7.5%
  • Digital I/O:Channel Count: 2 x 2 AES/EBU channels Input (optional DARS): 1 x XLR3F Output: 1 x XLR3M
  • Wordclock: Input: 1 x BNC 75 Ohms (switchable termination) Output: 1 x BNC 75 Ohms
  • Network: Connectors: 2 x etherCON connectors, also compatible with standard RJ45 connectors Redundant mode allows unit to connect to two independent networks Switched mode connects both ports to integrated network switch allowing daisy-chaining of devices
  • Operating Temperature: Operates at up to an ambient temperature of 122°F (50°C) Single fan
  • Power Requirements: 2 x IEC inputs with retaining clips 100~240 VAC, 50/60 Hz 24W consumption
  • Dimensions: 19 x 12.8 x 1.7" (482 x 352 x 43 mm)
  • Weight: 9.9 lb (4.5 kg)

Packaging Info

  • Package Weight:13.55 lb
  • Box Dimensions(LxWxH): 23.7 x 17.2 x 4.7"