JBL C60PS/T High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover .(priced as each; sold in pairs).

Name: JBL C60PS/T High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover .(priced as each; sold in pairs).
Brand: JBL
SKU: C60PS/T
Price: 407.00 USD
Availability: InStock

Vendor: JBL

Description JBL C60PS/T High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover .(priced as each; sold in pairs). Pendant Subwoofer with Crossover The JBL C60PS/T is a pendant subwoofer loudspeaker designed for...

$407.00 $512.76

Subtotal:

Quantity

Description

JBL C60PS/T High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover .(priced as each; sold in pairs).

Pendant Subwoofer with Crossover

The JBL C60PS/T is a pendant subwoofer loudspeaker designed for providing high impact and bass extension for high-fidelity sound systems in a wide variety of applications that includes leisure venues, restaurants, theme bars, retail stores, health clubs, music cafes, and other locations where it is utilized the full-range high fidelity foreground/background music systems. JBL C60PS/T features 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver featuring butyl rubber surround for long-term reliability, tight sound quality and well-damped, and for humidity protection is its polypropylene-coated cone. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former are ensuring good bass transient response and excellent stability under working conditions, high dutycycle, high power.

FEATURES

High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers.
200 mm (8 in) long-excursion driver.
8 ohm (150 Watt) and 70V/100V (100 Watt) operation.
Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp.
Stylish design, available in black or white (-WH).
UL listed (speaker and hanging cable system).

SPECIFICATIONS

	Frequency Range (-10 dB)	42 Hz – 350 Hz
	Frequency Response (± 3 dB)	55 Hz – 125 Hz
	Power Capacity	300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs
	Nominal Sensitivity (2.83V/1m)	88 dB
	Rated Maximum SPL	107 dB @ 1 m (3.3 ft) average, 113 dB peak
	Rated Impedance	8 ohms
	Transformer Taps	110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8
	Transformer Insertion Loss	0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W
	Standalone Hookup	Connect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.
	Subwoofer-Satellite Hookup	For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16
	Transducer	200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.
	Enclosure Material	High impact polystyrene
	Grille	Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting)
	Environmental	Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof rating
	Termination	Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.
	Suspension	Two identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).
	Safety Agency	Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
	Dimensions	333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket.
	Net Weight	7.6 kg (16.7 lb)
	Shipping Weight	17.6 kg (38.7 lbs) per pair-packed carton
	Included Accessories	Two suspension cable systems (see “suspension”, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors.
	Optional Accessories	MTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire.
	Colors	Available in black or white (-WH). Paintable.