Pro Intercom HS2 Headset Station, Flush Mount

Vendor: Pro Intercom
Description Pro Intercom HS2 Headset Station, Flush Mount The Pro Intercom HS2 is capable of performing the same functions as the BP1 beltpack have, but it is also designed to be mounted in a...
$355.00
Title

Pro Intercom HS2 Headset Station, Flush Mount

The Pro Intercom HS2 is capable of performing the same functions as the BP1 beltpack have, but it is also designed to be mounted in a U.S. standard 2-gang electriical box. In addition to the BP1's front panel controls for Sidetone, Mic On/Off, Volume and Signal, it is also comes with a recessed screwdriver adjust microphone sensitivity control for adjusting to a head set with either a electret or dynamic microphone. A version is also available (HS2M) which include a rotary switch for connecting the station for up to 4 different circuits, one at a time.

  • HS2 connections are via a rear panel plug-in terminal strip
  • The mating connector is included
  • The headset or handset connects to the station via a front-panel 4-pin XLR connector
  • The Call button on the front panel lights whenever anyone on the same circuit presses their signal light button
  • Component board of the HS2s are mounted to a thick metal mounting plate
  • Power requirement: 24 ~ 30 VDC, 10mA quiescent 40mA max. (with signal lamp lit)
  • Headphone output: 8~4k ohm acceptable, 200 ohm ideal.
  • Microphone input: 200 ~ 600 ohm dynamic; or 1.2~1.8k ohm electret
  • Sidetone rejection: > 50dB
  • Audio bridging impedance: 200 ohm unbalanced
  • Size: H 4.65 x W 4.72 x D 1.55 in. (11.8 x 12.0 x 3.9 cm)
  • Weight: 6.7 oz. (0.19 kg)